Approved standards

Home > News > Approved standards

Approved standards

VDE mark electrical components get a shortcut-Ningbo qiaopu Electric Co., Ltd.
VDE mark electrical components get a shortcut In general, the desire to carry out VDE approved type approval test in two ways: The first is business consulting directly to VDE and completed the application process, and test engineers in accordance with the requirements of VDE mail a considerable number of test samples to Germany, according to Germany VDE standards for testing one by one, and in accordance with VDE test workload total time spent by the German engineers working to pay the full price cost of testing. The second way is to first domestic enterprises have a good relationship with the VDE laboratory made a CB "CB test" application, and then through the CB test report to VDE approved type of test reports. We know, CB test certificate is the International Electrotechnical Commission IEC product safety certification organization (IECEE) Certification Authority Board (CCB) to develop a unified, by a country recognized by IECEE-CCN of a certificate issued by certification bodies (in China, CCEE is a CB test certificate of certification units), together with the attached test report used to notify other countries, certification bodies, some samples of electrical products in accordance with the IEC standards and uniform passed the test. The world has been more than 30 countries joined the CB system, VDE CB is a member laboratories, so we basically CB test report issued can accept, so the major projects in the country to complete the test. Only if there are individual experimental projects such as the German DIN standards and IEC standards differences exist between countries, VDE engineer will notify the agency side, to send additional samples of individual differences in pilot projects, followed by a comprehensive test results can be confirmed. Two methods of comparison, is easy to see, the first approach because it is outside the VDE test application, business understanding of the entire experiment more difficult, usually combined with the possibility of a test by VDE are relatively small, so it is necessary to contact back and forth many times Send samples to the outside, the project cycle more difficult to control. In addition, VDE German unit labor costs and technical personnel and technical personnel than the domestic or the high number, so the total cost might be higher. While the second appears to be divided into the domestic home abroad added a two-stage test, in fact, is the use of a local inspection station for domestic products is relatively familiar with the advantages of the state of technology, and the discovery of problems with communication can be improved in time, as well as domestic and foreign artificial price favorable conditions for various items and poor. The actual operation of the project through a number, proved the use of CB test report VDE approved bid approach can be said to be a shortcut to save time and money both. More information from the Ministry of Ningbo Qiaopu Electric Co., Ltd. [View Details]
VDE Certification Application Details-Ningbo qiaopu Electric Co., Ltd.
VDE Certification Application Details 1 --- first consulting the applicant to provide the Company Profile and VDE certified products to be the status description, such as: product type, name, parts, drawings, work schematics, technical data sheets, instructions and other information. (2) an agency relationship --- client (the applicant) signed agency agreements with the agency side, and further in the form of a written contract specifying the responsibilities, powers and obligations to ensure that both the application process can closely cooperate to make the application work smoothly and achieve the desired objectives. Power of Attorney is also presented to the company must prove themselves VDE commissioned by the applicant is indeed a legal basis. 3. Official application form and structural parameters table --- is an important document VDE application, the applicant may provide relevant information for the translation commissioned by the company filled out signed by the applicant to send back to VDE. 4 --- VDE received a formal application for confirmation of the application form and structure parameters form, about 2-4 weeks in the official written confirmation of the application and send invoices, factory inspection questionnaire and other information. 5 Samples --- VDE application is confirmed at the same time, will send this specific kind of test is based on the requirements and standards. May assist the applicant to obtain the relevant VDE standards, sort out all test items, test methods. After completion of the standard samples must be sent to the domestic requirements of self-test or the laboratory predictions. Forecast after passing the sample can be safe by EMS, arrived VDE send accurate testing. 1) Once the test project is all, will promptly notify the applicant in the first time. 2) The test results may also be flawed. Some mild defects, and VDE communication, with a little correction, do not have to re-send samples, VDE certification that can be. 3) When the test results when there is a major flaw, the company will discuss with the applicant the reasons for the failure. If necessary VDE return samples failed the test for reference analysis. Samples to be revised and improved after re-examining the procedures for the company, once again sending samples until qualified. If within six months to re-send samples, then the cost will be re-tested benefits are many. 6 --- factory inspection before issuing the review and supervision after the factory setting or non-supervisory review. Factory inspection before the Hyde letter will assist manufacturers of production facilities, laboratory equipment, measurement and control the entire quality system requirements of VDE self-examination. If the review, the inspectors make rectification request, to discuss factory as soon as possible and quickly implement corrective measures until re-examination qualified. --- 7 certification examination passed in the factory premise, if the sample tested, the results will promptly notify the VDE Hyde letter, VDE certificate will be issued soon. More information from the Ministry of Ningbo Qiaopu Electric Co., Ltd. [View Details]
VDE Standard. VDE Approval profile, VDE Introduction-Ningbo qiaopu Electric Co., Ltd.
VDE Standard. VDE Approval profile, VDE Introduction VDE VDE is the German national product logo. VDE testing and certification bodies Association of German Electrical Engineers Association is a subsidiary body, which was established in 1920 as an internationally recognized safety testing electrical and electronic parts and components, and the certification body, both in Europe and enjoys a high international reputation . Customers around the world, the demand for VDE approval was constantly rising trend. VDE testing and certification bodies Association of European and international standards under the current year is approximately 2200 customers in Germany and about 2700 foreign customers to 18,000 times the test. Today, the world has more than 200,000 kinds of products have VDE safety certification. VDE's full name is Prufstelle Testing and Certification Institute, which means that the German Electrical Engineers Association. Founded in 1920, is Europe's most experienced test pilot certification and inspection bodies is one of the announcement by the EU institutions and authorized international CB CE members. In Europe and internationally, to get the CENELEC European electrical products certification system, CECC Electronic Components Quality Assessment of the European co-ordination system, the IEC electrical products worldwide, electronic components and other certification system recognized. Assess a wide range of products including household and commercial uses electrical, IT equipment, industrial and medical technology equipment, materials and assembly of electronic components, wire and cable. VDE certification testing organizations In Germany Offenbach (Offenbach) of VDE testing / certification bodies, is part of German Electrical Engineers (VDE Verband Deutscher Elektrotechnikere.v. Referred to as VDE), founded in 1920. As a neutral, independent body, VDE laboratory based applications, according to the German national standard VDE standards or European EN, or IEC International Electrotechnical Commission standards on electrical product testing and certification, is Europe's most experienced in the world to enjoy it one of the high reputation of the certification bodies. Containing VDE testing and certification system. VDE mark in the field of electrical equipment for a very well-known certification marks, especially in the electrical components (such as circuit breakers, electromagnetic switches, wires / cables, plugs ... etc), but many manufacturers generally apply to represent a symbol of quality. VDE certification marks in the country now is that many manufacturers are also intended to apply to certification marks. It is nearly 2,200 per year for the 2700 German companies and customers in other countries to complete a total of 18 000 certification program. Begging to date, nearly 50 countries around the world have the 200,000 kinds of electrical products VDE mark. In many countries, VDE certification mark or certification mark than their more famous, especially importers and exporters to be recognized and valued. In China, the direction of diversification of exports of electrical products, making Europe, Australia, Southeast Asia and other regions as importers have made GS (Germany), BEAB (British), IMQ (Italy) and other security certification and CE mark requirements. The majority of the whole plant in the certification process again split up these requirements, requiring their manufacturers to ensure electrical safety parts supplier to get a high level of security certification mark, which is more and more parts production companies want to promote reason outside the VDE mark. VDE testing / certification agencies are not set up offices in China, so Ruoyu normally takes direct contact with the headquarters in Germany. VDE Certification Process 1, the first consultation Applicants to the Center About Us and the status shows to be certified products such as: product type, name, parts, drawings, work schematics, technical data sheets, instructions and other information. 2, an agency relationship Client (the applicant) and the Agent (China CCC certification inspection technology service center) signed agency agreements, and further to a written contract specifying the responsibilities, powers and obligations to ensure that both the application process can closely cooperate to make applying for jobs can be smoothly and achieve the desired objectives. China CCC Power of Attorney is also certified inspection technology service center must prove that he indeed was to VDE commissioned by the applicant's legal basis. 3, the official application form and structural parameters of table This is an important document VDE application, the applicant may provide information technology services commissioned by CCC Center for Translation completed, signed by the applicant to send back to VDE. 4, for recognition VDE received a formal application form and structural parameters form, about 2-4 weeks in the official written confirmation of the application and send invoices, factory inspection questionnaire and other information. 5, sample delivery VDE application is confirmed at the same time, will send this specific kind of test is based on the requirements and standards. The Service Center can assist applicants to obtain the relevant standards, clarifying all the relevant test items, test methods. After completion of the standard samples must be sent to the domestic requirements of self-test or the laboratory predictions. Forecast after passing the sample can be safe by EMS, arrived VDE send accurate testing. ⑴ Once the test project is all, the central project engineer will promptly notify the applicant in the first time. ⑵ test results may also be flawed. Some mild defects, the project engineer and VDE communication center, just a little correction, do not have to re-send samples, VDE certification that can be. ⑶ test results when there is a major defect, the center of the project engineer with the failure of the applicant. If necessary VDE return samples failed the test for reference analysis. After the sample to be revised and improved procedures for re-examining, re-sending samples until qualified. If within six months to re-send samples, then the cost will be re-tested benefits are many. 6, factory inspection Minutes before the factory inspection and certification after the fixed or non-certified supervisory review. Factory pre-review, the project engineer to assist manufacturers of central production facilities, laboratory equipment, measurement and control the entire quality system requirements of VDE self. If the review, the inspectors make rectification requirements, the project engineer to assist manufacturing center as soon as possible and discuss the rapid implementation of corrective measures until re-examination qualified. 7, Certification Passed inspection in the factory premise, if the sample tested, the results will promptly notify the CCC VDE Technical Service Center, VDE certificate will be issued soon. VDE Certification product range VDE testing on seven main areas: the ⑴ heating and electric appliances such as: sandwich stove electric tools ⑵ data processing and medical equipment such as: data processing equipment, electronic blood pressure monitor ⑶ lamps and electronic products, such as: light switches ⑷ cables and insulation materials such as: wire insulation sleeve ⑸ installed equipment and control devices ⑹ electronic components ⑺ EMC test VDE certification mark Association of German Electrical Engineers (VDE) National Certification Body: VDE-PRUFSTELLE TESTING AND CERTIFICATION INSTITUTEVDE is Germany's leading testing agencies directly involved in the German national standards. UL VDE mark with the same company can be authorized to use only VDE VDE mark. Most people's understanding of the VDE certification to stay on in the electrical components, in fact, VDE Testing In addition to traditional electrical components, wires and cables, plugs and other certifications can be issued the same EMC logo and VDE-GS mark. VDE mark for equipment based on safety regulations (GSG) of equipment, such as medical equipment, electrical components and wiring accessories. VDE-GS mark for equipment based on safety regulations (GSG) of the whole apparatus (can replace the VDE Mark). European ENEC Mark is currently mainly used as lighting and accessories, energy-saving lamps, IT equipment, transformers, switches and other household products. VDE-EMC mark for compliance with electromagnetic compatibility standard equipment. VDE cable signs for cable, insulated wire and catheter-ray tube. VDE identification line for cables and insulated cords. Signs according to CECC CECC (European Electronic Components Committee) standard for testing. CECC logo can also use the left indicator. VDE-Reg.-Nr.XXXXX. VDE certification for information to be submitted 1 Product description 2, the model shows the difference 3, circuit diagram 4, German manual 5, parts and materials 6, CB test report 7, other required materials VDE certified factory audit VDE factory inspection twice a year in principle. As for the review of the contents of the factory, the main review the consistency of product and samples, but must also review the inspection procedures, records, measurement and other quality control documents. 2 variable displacement engine (VDE), can further improve vehicle fuel economy. This engine technology is best suited for multi-cylinder engines. For example, the 12-cylinder engine, the adoption of this technology, equivalent to install two separate 6-cylinder engine, can drive the need to make an engine run, and let the other is in idle state. In this way, you can always adjust the engine's displacement, thereby reducing fuel consumption. More information from the Ministry of Ningbo Qiaopu Electric Co., Ltd. [View Details]
About UL Standard, UL Approval description-Ningbo Qiaopu Electric Co., Ltd.
About UL certified, UL certified description About UL certification English Underwriters Laboratories UL (Underwriter Laboratories Inc.) Shorthand. UL safety test of America's most authoritative, the world in safety testing and identification of the larger civil society institutions. It is an independent, non-profit, do testing for public safety professional organizations. It uses scientific methods to study the test identified a variety of materials, devices, products, equipment and construction to life, property damage and whether the degree of hazard; identify, write, issue the appropriate standards and help reduce and prevent the cause of life property losses of information, while carrying out the facts research business. In short, it is mainly engaged in product safety certification and safety certificate to operate the business, with the ultimate aim is for the market to be a fairly safe level of merchandise for personal health and property is guaranteed to contribute. Product safety certification for the elimination of technical barriers to international trade in terms of effective means, UL to promote the development of international trade also played an active role. UL was founded in 1894, the initial phase of the main UL fire in the insurance sector by providing capital to maintain the action, until 1916, UL was completely self-sustaining. After nearly a century of development, UL has become a world-known certification body, has its own set of strict organization and management systems, standards development and product certification program. UL by a safety experts, government officials, consumers, education, utilities, insurance and standards department of the Council composed of representatives of management, daily work by the president, vice president of processing. Currently, UL has five laboratories in the United States, headquartered in Northbrook town north of Chicago, while Taiwan and Hong Kong were established in the corresponding laboratory in the United States, UL is safe for consumers sign symbol. The world, UL is the most trusted manufacturers of conformity assessment providers. UL certified product type UL product certification, testing the types of services can be divided into column names, recognition and classification. 1) The column names (LISTED): Generally speaking, applies only to a complete listing of products and qualified personnel in the field to replace or install a variety of devices and equipment, are UL listed services a variety of products including: home appliances , medical equipment, computers, business equipment, and role in building various types of electrical products, such as distribution systems, fuses, wires, switches and other electrical components and so on. The UL listed product, usually marked on each product in the UL Listing Mark. Listing Mark of usage. 2) recognized (Recognized): UL approved service is a service project, the identification of the products only in the UL Listing, Classification or other approved products as components, raw materials use. Approved products in the structure is not complete, or have certain restrictions on use to ensure the desired safety performance. In most cases, approval of products tracking services in R class. L class products are recognized electronic line (AVLV2), processing wire (ZKLU2), harness (ZPFW2), aluminum (DVVR2), and metal flexible tube (DXUZ2). Approved product requirements with the approval mark. 3) classification (Classification): grading services only to evaluate the specific hazards of products, or to perform other than the standard UL standards (including the internationally recognized standards such as IEC and ISO standards, etc.) of product evaluation. Generally speaking, most consumer grade products are not products, but industrial or commercial use of the product. The Classification Mark UL mark indicates the product identified by the UL have a certain range of restrictions and regulations. For example, on the use of industrial chemicals such as solvents, to reach its ignition temperature is only possible to evaluate the range of fire. The classification of certain products and services serve the same column names, but generally only one aspect of the product or to evaluate certain aspects, such as in the United States, this type of medical X-ray diagnostic equipment to the country to comply with U.S. laws and radiation emission and beam accuracy requirements, but only because the UL classification of products as the X-ray, only the evaluation of its mechanical properties, electrical properties and other non-radiative properties of these aspects. 4) multiple listing, multiple or multi-tiered services recognition: When the applicant to obtain a UL listing above, approval or grading service, and its products to another company's name to the production to meet the needs of sales, may apply for multiple column names, or multiple multi-recognized rating service, in which case, get the column name, approval or classification of manufacturers are allowed to use the product list in the name of another company, but the products are company code , product code or UL's acceptable to other characteristics, must be the original column names, product approval or production levels consistent. 5) "AL" column name recognition or classification of service: If UL applicants do not want to get out in the name of their company name, recognition or classification of service, he can apply with another firm (usually a retailer or wholesaler) in the name of the column name, recognition or classification, that is, "AL" column name, approval or grading service. With the multiple listing, multiple or multi-tiered services recognized the difference between the applicant is not out of their celebrity. UL Listing Mark This is one of the most common UL Marks. If the product is labeled with the mark, it means that the product samples meet UL's safety requirements. These requirements are mainly UL's own published safety standards. This type of tag is typically seen in the following categories of products: appliances, computer equipment, stoves and heaters, fuses, power panels, smoke and carbon monoxide detectors, fire extinguishers and sprinkler systems, personal flotation devices, such as life jackets and life buoy, bulletproof glass and thousands of other products. ◇ C-UL Listing Mark This mark applies to products sold on the Canadian market. In accordance with Canadian safety requirements for such a tag affixed to the product evaluation. Canadian and U.S. safety requirements, safety requirements may be different. The following types of devices can see this on the mark: electrical and computer equipment, vending machines, household burglar alarm systems, lighting, and many other types of products. ◇ C-UL US Listing Mark UL in early 1998 to introduce this new Listing Mark. It said that both comply with U.S. requirements, but also with Canada's claim. Canada / United States flag is optional. UL encourages those products both in the United States evidence, and evidence of the manufacturers in Canada to use this new combination of tags, but manufacturers can continue using only the United States or Canada for the UL mark. ◇ Classification Mark The UL mark appears after the assessment of products. UL has affixed the mark on the special properties of certain products were evaluated. Here is the application of some special properties in a limited range of risk, or limited or special conditions of use. A typical situation is that UL Classified product is a versatile building materials and industrial equipment. For example, the device type from the UL rating are diving suits, fire doors, fire protection and industrial trucks. ◇ C-UL Classification Mark The Classification Mark applies to products sold on the Canadian market. It indicates that UL has Canadian standards, on certain conditions or characteristics of hazardous products were evaluated. For example, C-UL grade products including air filters, fire stop devices, certain types of roofing systems. ◇ C-UL US Classification Mark UL in early 1998 marked the introduction of this new classification. It said that both comply with U.S. requirements, but also with Canada's claim. Canada / United States flag is optional. UL encourages those products both in the United States evidence, and evidence of the manufacturers in Canada to use this new combination of tags, but manufacturers can continue using only the United States or Canada for the UL mark. ◇ approved parts and Canadian recognition component marks marks Ordinary consumers rarely see these tags, because they are used in parts, these parts are some of the larger product or system components. These components themselves can not directly constitute a complete product, or its use restricted. Can be seen in large parts of the product approval marks, including some switches, power supplies, printed wiring boards, some kinds of industrial control equipment, and thousands of other products. Canada intends to sell the products on the market Recognized Component mark affixed with a "C" letter. ◇ approval for parts of Canada and the U.S. mark This is a new UL Recognized Component Mark, it was April 1, 1998 to take effect. It can be used both by UL in accordance with Canadian requirements and demands evidence in accordance with U.S. components. Originally did not intend to introduce a combination of UL Recognized Component mark, but because both of those products sold in Canada, and sold in the United States, the UL certification customers like Canada / United States lists and classification tag, so the introduction of this new marker. ◇ System Registration mark The UL mark registered company in the product can not be seen. It is said that the meaning is: the adoption of a facility management system in accordance with UL standards assessment. By UL to assess their management systems to process, can be used to enhance the corporate image, becoming an integral part of marketing strategy. UL standards for use in this regard is: ISO9000 series quality assurance standards; QS-9000 and TE complementary standards, which are the three U.S. auto manufacturers to their suppliers to develop quality standards; ISO14001, the environmental management system covering standards; AS9000, aerospace quality management system; TL9000, telecommunications quality management system; social responsibility management system SA8000. ◇ Marine Mark UL Marine mark appears on the marine use of those products. This mark is affixed to the product have been published in accordance with UL standards and other marine safety standards and norms applicable to the assessment. When the product is exposed to some of the harsh maritime environment, such as vibration, shock, fire protection, water intrusion and corrosion caused by salt water, the boat or yacht will be damage. UL published the above-mentioned marine safety standards and other applicable standards and specifications that address these damages. Marine UL mark for the type of device, including alternators, batteries / charger / power change control, navigation lights, fuel tank, filter and pump. [Edit this section] UL Certification Type UL product certification, testing the types of services can be divided into column names, recognition and classification. 1) The column names (LISTED): Generally speaking, applies only to a complete listing of products and qualified personnel in the field to replace or install a variety of devices and equipment, are UL listed services a variety of products including: home appliances , medical equipment, computers, business equipment, and role in building various types of electrical products, such as distribution systems, fuses, wires, switches and other electrical components and so on. The UL listed product, usually marked on each product in the UL Listing Mark. Listing Mark of usage. 2) recognized (Recognized): UL approved service is a service project, the identification of the products only in the UL Listing, Classification or other approved products as components, raw materials use. Approved products in the structure is not complete, or have certain restrictions on use to ensure the desired safety performance. In most cases, approval of products tracking services in R class. L class products are recognized electronic line (AVLV2), processing wire (ZKLU2), harness (ZPFW2), aluminum (DVVR2), and metal flexible tube (DXUZ2). Approved product requirements with the approval mark. 3) classification (Classification): grading services only to evaluate the specific hazards of products, or to perform other than the standard UL standards (including the internationally recognized standards such as IEC and ISO standards, etc.) of product evaluation. Generally speaking, most consumer grade products are not products, but industrial or commercial use of the product. The Classification Mark UL mark indicates the product identified by the UL have a certain range of restrictions and regulations. For example, on the use of industrial chemicals such as solvents, to reach its ignition temperature is only possible to evaluate the range of fire. The classification of certain products and services serve the same column names, but generally only one aspect of the product or to evaluate certain aspects, such as in the United States, this type of medical X-ray diagnostic equipment to the country to comply with U.S. laws and radiation emission and beam accuracy requirements, but only because the UL classification of products as the X-ray, only the evaluation of its mechanical properties, electrical properties and other non-radiative properties of these aspects. 4) multiple listing, multiple or multi-tiered services recognition: When the applicant to obtain a UL listing above, approval or grading service, and its products to another company's name to the production to meet the needs of sales, may apply for multiple column names, or multiple multi-recognized rating service, in which case, get the column name, approval or classification of manufacturers are allowed to use the product list in the name of another company, but the products are company code , product code or UL's acceptable to other characteristics, must be the original column names, product approval or production levels consistent. 5) "AL" column name recognition or classification of service: If UL applicants do not want to get out in the name of their company name, recognition or classification of service, he can apply with another firm (usually a retailer or wholesaler) in the name of the column name, recognition or classification, that is, "AL" column name, approval or grading service. With the multiple listing, multiple or multi-tiered services recognized the difference between the applicant is not out of their celebrity. 6) System Certification Services: As a board member of the internationally recognized, UL extensive involvement in ISO9000 quality system certification, ISO14000 environmental certification, QS9000 quality system certification and the automotive industry aircraft industry AS9000 quality system certification services. So far, a total of 116 factories in the country to obtain the UL System Certification; of which 21 for the ISO9001 certification, 85 for the ISO9002 certification, a certification to ISO14001, QS9000 certification for the nine UL standard directory * UL20 (General-Use Snap Switches) * UL45 portable power tools (Portable electric tools) * UL94-12 parts of equipment and utensils with plastic material flammability tests (Test for flammability of plastic materials for parts in devices and appliances) * UL153 in English and portable lights (Portable electric luminaires) * UL197 commercial electric cooking equipment (Commercial electric cooking appliances) * UL207-containing refrigerants in non-electrical components and accessories (Refrigerant-containing components and accessories, nonelectrical) * UL224 extruded insulation tube (Extruded insulating tubing) * UL244 solid-state equipment controls (Solid-state controls for appliances) * UL248-1-2000 low voltage fuse (fuse) Part 1 (Standard for Low-Voltage Fuses, Part 1: General Requirements) * UL248-10 (Standard for Low-Voltage Fuses - Part 10: Class L Fuses,) * UL250 Household refrigerators and freezers (Household refrigerators and freezers) * UL291-2000 automatic intercom system (Automated teller systems) * UL298 portable electronic hand-held lamp (Portable electric hand lamps) * UL310 quick connect electrical connector (Electrical quick-connect terminals) * UL399 water cooler (Drinking-water coolers) * UL429 electric control valve (Electrically operated valves) * Subject UL 429A, "Outline of Investigation for Electrically Operated Valves for Fire Protection Service," * UL444 communication cable (Communications cables) * UL458 land vehicles and marine power converters and systems (Power converters / inverters and power converter / inverter systems for land vehicles and marine crafts) * UL471 commercial refrigerator and freezer (Commercial refrigerators and freezers) * UL474 dehumidifiers (Dehumidifiers) * UL484 room air conditioners (Room air conditioners) * UL486A use of copper conductor wire connector and lug * UL486C splice connector (Splicing wire connectors) * UL486E aluminum and / or copper wiring terminal equipment (Equipment wiring terminals for use with aluminium and / or copper conductors) * UL489 molded circuit breaker, molded case switches and circuit breakers (Molded-case circuit breakers, molded-case switches, and circuit-breaker enclosures) * UL489A for communications equipment on the circuit breaker * UL496 (in English) Edison screw lampholders (Edison lamp) (Edison-base lampholders) * UL497A auxiliary communication circuit protection devices (Secondary protectors for communication circuits) * UL498 connection plugs and sockets (Attachment plugs and receptacles) * UL499 electric heating device (Electric heating appliances) * UL507 fan (Electric fans) * UL746A polymer. Fast performance assessment (Polymeric materials - Short term property evaluations) * UL746C assessment of electrical equipment with polymeric materials (Polymeric materials - Use in electrical equipment evaluations) * UL758 equipment, wiring materials (Appliance wiring material) * UL817 cord sets and power supply cord (Cord sets and power-supply cords) * UL859 home personal tinkering with appliances (Household electric personal grooming appliances) * UL935 English fluorescent ballasts (Fluorescent-lamp ballasts) * UL1012 addition to two other than the power supply (Power units other than class 2) * UL1018 Chinese fish farming equipment, electrical (Electric aquarium equipment) * UL1026 (in English) home electronics, cooker and food processing equipment (Electric household cooking and food serving appliances) * UL1077 (in English) for additional electrical equipment protection standard (Supplementary Protectors for Use in Electrical Equipment) * UL1278 (Standard for Movable and Wall-or Ceiling-Hung Electric Room Heaters) * UL1310A (in English) 2 power supply (Class 2 power units) * UL1446 insulation system General (Systems of insulating materials - General) * UL1570 fluorescent equipment (Fluorescent Lighting Fixtures) 1997 Edition * UL1581 wire, cable and cord of the reference standard (Reference standard for electrical wires, cables, and flexible cords) * UL1585 2 and Class 3 Transformers (Class 2 and class 3 transformers) * UL1642-1 -2 -3 -4 UL standard for safty for lithium Batteriy lithium battery * UL1659 cord connected device and plug the power cord with a knife-shaped switch (Attachement plug blades for use in cord sets and power-supply cords) * UL1693 electric radiant heating panels and heating panel assembly (Electric radiant heating panels and heating panel sets) * UL1778 uninterruptible power supply and distribution equipment (Uninterruptible power supply equipment) * UL1786 night lighting (Nightlights) * UL1977 data, signal, control and power supply components, connectors (Component connectors for use in data, signal, control and power applications) * UL1993 self-ballasted lamp and adapter (Self-ballasted lamps and lamp adapters) * UL2054 household and commercial batteries (Household and commercial batteries) * UL2111-1997.3 motor with thermal protection device (Overheating protection for motors) * UL2111-2002 motor with thermal protection device (Overheating protection for motors) * UL6500 household, commercial and similar audio, video and music devices (Standard for Audio / Video and Musical Instrument Apparatus for Household, Commercial, and Similar General Use) * UL60950 (Chinese) Information Technology Equipment (Safety of information technology equipment) UL Certification Process Apply the UL mark products including the following steps: An applicant to submit information about companies and products Written application: You should be a written request on your company's UL's product testing. Company information: in English and provide the following units of detailed and accurate name, address, contact person, postal code, telephone and fax. (A). Applicant: made responsible for all product testing and application engineering services company (B). Listed Company: UL's published in a variety of catalog companies listed by name (C). Production plants: the product manufacturer and producer. Product information: Product information should be in English. (A). Product Name: full name of the product provided. (B). Model: details of all the need for experimental models of products, such as species or classification. (C). The product intended use: for example: homes, offices, factories, mines and ships. (D). Parts table: detailed product parts and components model (DOI), rating, manufacturer's name. For insulating materials, please provide the name of raw materials, such as: GE Polycarbonate, Lexan Type 104. When the components are UL certified or recognized or, prove that the components of the specific model, and indicate the UL file number. (E). Electrical properties: the electrical and electronic products. Provide electrical schematic (circuit diagram), electrical properties of the table. (F). Structure: For most products, to provide the product structure diagram or exploded diagram, list of ingredients and so on. (G). Product photos, instructions for use, safety, or other items such as installation instructions. 2 product testing Product testing is generally the UL laboratories in the United States, UL is also acceptable audited in third-party test data. Experimental samples will also send your request or be destroyed. If the product test results meet the requirements of UL standard, UL tested and the company will issue a report and tracking service rules (FollowUp Service Proccdure) test report will detail the test conditions, the sample reached the target, the product structure and appropriate use of the product safety signs. Details of the tracking service includes the product description and instructions for inspectors UL region. A copy of the inspection report sent to the applicant company, a copy of the tracking service rules sent to each production plant. 3, the applicant is authorized to use the UL mark UL inspectors in China, contact the regional production plant for the first factory inspection (Initial Production Inspection. IPI), inspectors check your products, parts and components in production lines and warehouses warehousing situation in order to verify whether the product structure and parts rules consistent with the tracking service, if the details required in the regional inspectors will conduct witnessed the experiment, when the test results meet the requirements, the applicant is authorized to use the UL mark. Following the IPI, the inspector will check from time to time to the factory to check the product structure and to witness experiments, the frequency of inspections by the type of product and production decisions, most types of products be inspected at least four times a year, inspectors check to to ensure that products continue to be consistent with the UL requirements, the product you plan to change the structure or components before you notice UL, changes for small changes, do not repeat any experiment, UL can quickly change tracking service rules, so that inspectors can accept such a modification. When the UL product changes that affect their safety, the need for applicants to submit samples of the necessary re-testing. Tracking service is not included in the test costs. If the product test results can not meet UL standard, UL will notify the applicant, indicating the existence of the problem, the applicant to improve product design, you can re-produce for examination the product, you should tell the UL engineer products that do what improvements over its decision to UL certification is to apply the steps. UL certification test details UL inspector's test is essentially a mechanical operation. Depending on the product, the inspector's test based on a bulletin (Bulletin), Rule (Procedure), FUII (if included in the Conditions) and UL standards (if FUII in demand). If inspectors visit the factory, the factory is producing the UL, the UL product or inventory, the inspector will sample one of the following ways: 1 taken from various parts of the production line drawn from the warehouse with a complete product. (2) to extract various components from the warehouse with a complete product line. 3 taken from the warehouse for a full product split. The specific number depends on the sampling rules, FUII (tracking test instructions), SAP (standard attached page) or directly from the UL lab orders. Inspector Each inspection does not necessarily test all products, but they will try at least a year or two years test all the product categories or models. In general, UL requirements for factory production system is not too high, only requires measurement of the equipment once a year, save their own factory inspection records, and substandard products have some means of control can be. Inspection, on-site representatives (UL inspectors) will focus primarily on the product itself, they will check the products one by one based on the test structure, components and assembly. For the components related to product safety, general rules will specify requirements for UL certified products, and will specify the manufacturer and model; for the shell, shields and other plastic parts, general rules will specify their requirements of raw materials and dimensions. Site representative will verify the details of the above and set forth in the UL mark. In addition, if the rules or standards or FUII required field test the product, on-site representatives will ask the factory inspector to do the appropriate tests, and field representatives in the next witness. If the rules are also required to send samples to UL for tracking test, factory inspectors should be made with the corresponding samples, sample labels written by the inspector, provide address and sealed and then sent to the corresponding UL by the plant laboratory. If the plant produces the corresponding products in full compliance with UL test requirements, and no other violation tracking service agreement where the inspector will issue a tracking survey report (Inspection Report); factory representatives to confirm the accuracy of its contents on the report after signature; a test is completed. If the test occurred during the test does not meet with the situation, inspectors will issue a notice of change (Variation Notice), and take appropriate measures according to specific circumstances. Products used for unauthorized UL mark, the examiner will be asked to remove the UL mark; the product does not meet UL requirements, the inspector will be required to remove the UL mark or rework the factory to conform to requirements; if the plant does not agree to the above matters of opinion, you can retain the UL mark, but must stop shipments, the inspector will notify the appropriate laboratory, responded by UL to decide whether to retain the UL mark; if only some small problems do not affect the safety of the product nature, the inspector will make a temporary decision to accept and report to the appropriate laboratory; standard if it is some obvious errors, such as typing errors or bit errors, the product does not affect the plant's eligibility, but the document as a UL process, the inspector will issue a notice of change. Under normal circumstances, unless it is UL's responsibility, the inspector will ask the factory does not meet the laboratory to the corresponding explanation, UL will be made according to your interpretation of the corresponding answer. Of course, the inspector is only temporary judge, the final decision of course, the various laboratories in the UL. If the factories do not agree with the practice test where can reflect to the appropriate laboratory, at this time, inspectors obligation to provide the appropriate contact and contact methods. Changes recorded in the confirmation notice the content is correct, the factory representative shall sign the notice. UL certified factory inspection UL inspectors in China, contact the regional production plant for the first factory inspection (Initial Production Inspection, referred to as IPI), inspectors check your products, parts and components in production lines and warehouses warehousing situation in order to confirm the product structure and parts is consistent with the tracking service rules, if the details required in the regional inspectors witnessed the experiment will be conducted. When the test results meet the requirements, the applicant is authorized to use the UL mark. Following the IPI, the inspector will check from time to time to the factory to check the product structure and to witness experiments. The frequency of inspections by the type of product and production decisions, most types of products checked at least four times a year (the cost of follow-up service costs are not included in the test). Inspectors check to ensure that products continue to be consistent with the UL requirements, you plan to change the product mix or parts, please notify UL. Changes for small changes, do not repeat any experiment, UL can quickly change tracking service rules, so that inspectors can accept this change. When the UL product changes that affect their safety, the need for applicants to submit samples of the necessary re-testing. UL Certifications Follow For the UL certification is an integral part, in order to ensure the UL Listed, UL approved products continue to meet the standards and requirements, UL developed a "test track" system. "Follow-Up" is distributed by the UL around the world to send representatives to the local site plant site to track the products of the UL test. Its purpose is through the factory production process, testing process and product control and tracking of UL's standards for inspection and verification rules to ensure that the manufacturer's production process, inspection process and the products always meet the UL requirements. Follow-based Representatives to the factory site mainly based on "Follow-rules" for testing. "Follow-Up Rules" by UL engineering department, in the submission of samples for test preparation, this document includes a comprehensive description of the product, including pictures] manual. It also provides manufacturing facility during production often have to do various tests, some test requirements for 100% of the product, such as pressure test. Some tests can be carried out sampling, also provides on-site inspection on behalf of the factory floor to sample the pilot project. Field Representative in accordance with the details of such tests and provides test results to determine eligibility. Tracking test product categories UL's Follow-Up class is divided into R and L classes. L type of service used and safety-related products, such as fire extinguishers, smoke detectors, fire doors and a large number of output products, such as electrical equipment, wires and circuit breakers. Categories of products belonging to L, the production plant must be ordered directly to the UL label on the product. R type of service is mainly used for electrical equipment such as electric fans, televisions, hair dryers, ovens and other commonly used to produce the corresponding line of products. UL approved terminology "AL" LISTING (multiple listing or recognition) AGENT (agent) APPEALS PROCEDURE (grievance procedures) APPENDIX (attached pages) APPLICANT (Applicant) AUTHORIZATION PAGE (authorized page) CATEGORY CONTROL NUMBER (category control number) COMPONENT (parts) CONDITION OF ACCEPTABILITY (conditions apply) CONTROL NUMBER (Control Number) FACTORY IDENTIFICATION (plant identification) FACTORY INSPECTION (factory test) "AL" LISTING, CLASSIFICATION OR RECOGNITION (multiple listing or recognition) And authorized by the applicant to apply to different applicant (celebrity column) and the other in the name of the column name or the establishment of accreditation AGENT (agent) Commissioned by the applicant, the applicant's name and UL in activity between the individual or business APPEALS PROCEDURE (grievance procedures) If the customer engineering test or track the test results have different views, with the relevant engineers or site representatives to discuss without fear of endangering the future of the conclusions. If this level can not get a satisfactory answer, the customer can appeal to a higher level, until the president. APPENDIX (attached pages) Part of rules, including the responsibility of factory and field representatives as well as relevant test requirements. May also be made to describe the samples sent to the UL test. APPLICANT (Applicant) Apply to UL their parts, products or systems for testing companies or individuals. In law, the party will be responsible for the cost of testing and tracking service, and the test results and all information with the relevant rights. See also agent. AUTHORIZATION PAGE (authorized page) Archive services in the tracking details of the front page of the factory test, to authorize the appropriate track inspection services (L or R class class) and allows the certification mark CATEGORY CONTROL NUMBER (CCN) (Category Control Number) UL listed, recognized, classified service in different product categories of character representation. If AVLV2 said electronic wire; QOWZ said portable lamps. General, XXXX for listing products, XXXX2 of approved products, XXXX7 that meet the Canadian standard listing products, XXXX8 recognized that products meet Canadian standards. COMPONENT (parts) A part of the product, in addition to participating as part of a complete product testing throughout the product, but also need to individually test their performance and / or structure. Parts can be a column name or column name recognition components. CONDITION OF ACCEPTABILITY (conditions apply) These projects are listed in the column name recognition or parts of the report, but not as a representative of the test site basis. These projects are based on test results, indicate the parts and complete products with restrictions and conditions. For example, a switch in the report, may be "appropriate conditions" specified in the product only for 1A current or less than the temperature below 125C. CONTROL NUMBER (Control Number) UL recognition mark one of four possible components, specified by the UL. Depending on the product categories and different types of tracking services, Control numbers may change periodically. FACTORY IDENTIFICATION (plant identification) By the same product in different factories of manufacturers to use a particular identification mark is used to distinguish a product in which the factory production. FACTORY INSPECTION (factory test) More information from the Ministry of Ningbo Qiaopu Electric Co., Ltd. [View Details]
SEV certification, Rui Shian Certification-Ningbo Qiaopu Electric Co., Ltd.
SEV certification, Rui Shian Certification Non-EU countries, the product certification system does not join the European Union's CE. Therefore, product regulations in Switzerland have their own requirements, low-voltage products in Switzerland SEV regulations: to enter the Swiss market of electrical and electronic products need to obtain the S-PLUS logo. This flag contains the safety of products also covers electromagnetic compatibility (EMC) requirements. Voltage: AC 23 Factory Manual: French 0V/50Hz Audits: No experience, Italian language, or DS Certification period: If an application with the CB takes 2-3 weeks. No CB takes 4-6 weeks. More information from the Ministry of Ningbo Qiaopu Electric Co., Ltd. [View Details]
SEMKO Certification, Certification Overview Switzerland-Ningbo Qiaopu Electric Co., Ltd.
SEMKO Certification, Certification Overview Switzerland SEMKO SEMKO founded in Sweden in 1925, formerly the Swedish government approved mandatory safety certification unit, can be said that Sweden's Inspection Bureau. SEMKO testing the world's first one of the organizations engaged in security testing, accreditation and conformity assessment by the Swedish Committee (Swedish Board for Accreditation and Conformity Assessment - SWEDAC) as a nationally recognized laboratory, is more than the designated agency under the EU directive (Notified Body), but also as the International Electrotechnical Commission (International Electrotechnical Commission - IEC) CB scheme certification report issued by the largest number of tests and testing institutions. SEMKO Intertek Group in 1994, was acquired, merged with ETL ETL SEMKO Division. The above information from the Ministry of Ningbo Qiaopu Electric Co., Ltd. [View Details]
SABS Standard, SABS Approval profile-Ningbo Qiaopu Electric Co., Ltd.
SABS Standard, SABS Approval profile SABS certification South Africa SABS certification (compulsory certification) (A) SABS Certification Overview South African National Bureau of Standards (South African Bureau of Standards, SABS) is promulgated under the 1945 "State Standards Act," established, is a subsidiary body of South African Trade and Industry. South Africa SABS is a neutral third-party certification body responsible for South Africa's system certification and product certification. In addition to standard-setting duties, SABS also on behalf of peremptory norms of national management standards, compliant products, to grant the right to use the logo, also responsible for in line with ISO9001, ISO9002 certificate issued by the enterprise, and represent the country and some major buyers responsible for pre-shipment inspection and testing, issue a certificate of competency. SABS certification is widely used in chemical, biological products, fiber products and clothing, machinery products, safety equipment, electrical products, civil engineering and construction and automotive products and other fields. In recent years, SABS certification has become the South African government the importance of weight control products imported. (B) SABS product certification range SABS certification product certification and system certification is divided into two categories, while the SABS Product Certification includes the following eight categories: chemical, biological products, fiber products and clothing, machinery products, safety equipment, electrical products, civil engineering and construction and automotive products. Which relates to building materials and products: stone products, concrete products, roofing materials, cement, lime, cement mixture, natural building stone, safety glass, steel, wood and wood products, brick, tile, paint, coatings, sealants, etc. (C) SABS logo prerequisite to obtain 1 products in line with a SABS / SANS national standards; 2 products by the corresponding standard test; 3. To meet the ISO 9000 quality system requirements or other specified requirements; 4. Only the product and quality system requirements are met before they apply for the use SABS mark; 5 routine product testing to be carried out under the guidance and submit test results and open; 6 Quality assessment at least twice a year and requires full-content assessment. (D) SABS certified general process 1 manufacturers fill out the application form completely; 2 If the factory has more than one plant, they are required to fill separate application form. Within the scope of certification requirements for each product are reflected in the application form. In addition, the plant also need to fill out the credibility of the person in charge of the application form, the person in charge to ensure that the first review of the certification fees and other costs; 3 South African Bureau of Standards, after receiving the application form will be issued a review of the quotations; 4. The offer was accepted under the premise of the South African Bureau of Standards will conduct a review of the plant; 5 If the above are reviewed by the South African Bureau of Standards will be prepared each year supervision contracts; 6 every year there will be a random review of two auditors, the annual supervisory review and testing fee will be stated in the contract; 7 random samples of two auditors will be brought back to the laboratory; 8 after the test sample, the South African Bureau of Standards will be the buyer of goods from South Africa in the extraction, if the batch of goods is less than 4 times per year, then the sample is not sent on request from the factory, the cost will be plants bear; 9. If the test result is unsatisfactory, then the cost of the sample and retest costs are borne by the factory; 10 certificate will be valid for three years, unless there are other reasons to cancel the certificate. More information from the Office of General Ningbo Qiaopu Electric Co., Ltd. [View Details]
PSE Standard profile, PSE Approval-Ningbo Qiaopu Electric Co., Ltd.
PSE Standard profile, PSE Approval Japan PSE certification More and more countries joined the WTO, to protect their own industries and markets, many countries have enacted relevant laws and regulations, the technical specifications of the imported goods for the restrictions, technical barriers to the formation, so that products with safety, environmental protection and compatibility , while limiting the import of products - Japan is such a complex national security system. In 1995, Japan enacted a new law to ban the product, the new regulations no longer follows the principle of error-party liability, while the use of the practice in Europe and North America (the principle of fault-party liability), provided the responsible party for the safety of the product manufacturers, import Manufacturers, distributors and so on. April 1, 2001 until the Japanese electrical and Material Control Law (DENTORI) will control the products are divided into A, B two categories, of which, A class including 165 kinds of products, mainly in the power cord, fuses, switches, transformers , ballast, etc.; B class, including 333 kinds of products, mainly lighting, household appliances, office equipment. A mandatory products must obtain government certification that the T mark and the mark only by the MITI (MITI) issued. Class B compliance products or applications are required to do self-proclaimed third-party certification, for example, the S TUV Rheinland marked signs. After 1 April 2001, electrical and Material Safety Law (DENAN) replaced DENTORI law, while Japan also abolished the T flag, a certificate issued by the government no longer directly, but to authorize a third party product certification bodies for conformity assessment test. New regulations will be the product into "a particular class of electrical appliances and materials" and "non-specific electrical and material class." The "specific type of electrical appliances and materials," including a total of 112 kinds of products; "non-specific category of electrical appliances and materials", contains 340 products. To enter the Japanese market "specific electrical and material type" products must obtain third-party certification mark PSE (diamond) mark; "non-specific electrical and material class" products or applications are required to do self-proclaimed third-party certification mark PSE (round ) logo. The new law reduced the number of categories of products, more products are classified as "non-classified products", no longer constrained by DENAN, and some previously classified as "A class" product has been classified as "Specific electrical appliances and materials class." Japan's electrical products market is large, the Japanese consumer electrical product safety very seriously. From April 1, 2001, Japan "Electrical Products Control Act (DENTORI)" was renamed "Electrical Appliance and Material Safety Law (DENAE)", unity with PSE mark, and to strengthen penalties for importers. PSE (Product Safety of Electrical Appliance & Materials) certification (in Japan called "fit check") is the mandatory Japanese electrical goods market access system, in Japan, "Electrical Appliance and Material Safety Law" provides an important element . Currently, the Government of Japan Japan, "Electrical Appliance and Material Safety Law" stipulates that the electrical supplies are divided into "specific electrical supplies" and "non-specific electrical supplies," in which "specific electrical appliances," including 115 kinds of products; "non-specific electrical supplies." including 338 kinds of products. PSE includes two EMC and safety requirements. Where a "specific electrical items" directory of products into the Japanese market, must be authorized by the Japanese Ministry of Economy of third-party certification bodies, to obtain a certificate of authentication, and a diamond on the label PSE mark, as shown below: CQC only apply in China as Japan PSE certification accredited certification bodies, in February 2007, will formally submit the application materials to the Japanese Ministry of Economy. In March, Japan's METI to send NITE agency assessors PSE group of CQC-site assessment for a three-day on-site audits, review the operation of experts on the standardization of CQC and serious working attitude expressed admiration for the technical engineer give a high level of professionalism and evaluation, and that CQC is the world's leading certification body, on-site assessment is not aware of any nonconformance or observation items, ultimately with "zero defect" conclusion through a review of the CQC. April 23, 2007, the Japanese Ministry of Economy No. 129 bulletin released by the Japanese METI Minister signed an order officially authorized by China Quality Certification Center (abbreviation CQC) Japan PSE undertake compulsory product certification, thus, CQC become the UL, TUV and other international renowned certification body after the fourth by the Japanese government authorized foreign certification bodies. Currently, CQC obtained Japan PSE certification of product categories ranging from three categories: Wire and cable (including 20 kinds of products), wiring apparatus (electrical accessories, lighting, appliances, etc.) (including 38 kinds of products), electric power applications in mechanical appliances (appliances) (includes 12 products). More information from the Office of General Ningbo Qiaopu Electric Co., Ltd. [View Details]
LCIE Standard, Approval NF France, the French Certification - Ningbo Qiaopu Electric Co., Ltd.
LCIE Standard, Approval NF France, the French Certification - Ningbo Qiaopu Electric Co., Ltd. LCIE Central Power Electric laboratory in France (LCIE) is Veritas Group (Bureau Veritas, referred to as BV) a wholly owned subsidiary of National Power as an international authoritative body electrical experiments, first to receive IECQ watchdog qualification, in the world IECQ system for quality assessment and certification of all operations (including the IECQ-HSPM system certification). Bureau Veritas Group, founded in 1828 and headquartered in Paris, France, is the world's leading international inspection and certification group, focused on the quality of its services, health, safety and environmental management and assessment of areas of social responsibility. From its inception, Bureau Veritas Group service network covering more than 150 countries, with more than 850 offices and laboratories, about 33, 000 employees worldwide end markets for the 300, 000 different areas of customer service. In China, the Bureau Veritas Group has 4,000 employees, 30 offices and laboratories, and 30, more than 000 customers with quality service. Veritas Group is the industry's access to world governments and international organizations recognized by one of the largest. [1] Bureau Veritas Group, Department of electrical and electronic consumer goods, from France LCIE, Taiwan, ADT, Curtis-Straus and the United States and Germany INNOVA merger of the world's leading testing, certification, inspection agencies. Relying on the Veritas Group, a powerful group of forces and consumer electrical and electronic services in Europe, the Americas and Asia team of professionals, can provide a range of specialized electrical and electronic business services. In addition, Bureau Veritas Group, a subsidiary of France LCIE is among the few with the IECEE CB certificates issued by recognized and issued by the PV GAP mark of the fully qualified NCB (National Accreditation Body), one set up photovoltaic lab in Shanghai, covers an area of 1500 square , is the first for the solar panels and components are fully tested the ability of NCB (LCIE France)'s laboratory. Able for the maximum size of 2mx2m solar panels to provide IEC / EN 61215 / IEC / EN 61646, IEC / EN 61730-1 / -2 Service: In China, BV LCIE has 540 employees in nine cities in nine offices / labs to provide testing, inspection, certification, consulting and other services. BV LCIE test range of products / Our Product Scope: ► Home Appliances / Household Appliance ► Power Tools / Power Tool ► Lamps / Lighting ► equipment and components / Apparatus ► Low Voltage / Low Voltage Device ► Audio and Video Products / Audio Video Products ► IT equipment / IT Equipment ► explosion-proof products / ATEX ► Battery / Battery ► PV / Photovoltaic www.ccip.fr.com The above information is integrated by the Office of Ningbo Qiaopu Electric Co., Ltd. [View Details]
KEMA Standard, KEMA Approval Overview - Ningbo Qiaopu Electric Co., Ltd.
KEMA Standard, KEMA Approval Overview - Ningbo Qiaopu Electric Co., Ltd. KEMA KEMA (Keuring Van Elektrotechnische Materialen); Dutch Power Research Institute, a global power for the pilot certification authority KEMA-KEUR to (electrical) safety mark of quality. Electrical products must obey "the European Low Voltage Directive" standard, and CE product standards. Specific requirements and European standards are the same. If you get a product KEMA-KEUR sign to these requirements, which means you can automatically meet the requirements of European law. Our range of experts in testing, evaluation, inspection, audit and certification servicesin all aspects. Can also provide training and consultancy services. Our scopeincludes not only the mechanical and electrical engineering, including environmental, safety and working environment. Netherlands Electrotechnical Materials Association (KEMA) NVKEMA implementation of European Community law on low-voltage electrical products (February 19, 1973), the Netherlands' Act requires that all electrical appliances in the Netherlands on the market of electrical products should meet therequired safety standards. As KEMA certification mark issued in accordance with these standards, so they can prove KEMA a KEUR meet the Dutch electrical products, "Electric Act." KEMA isaccredited by the Ministry of Economic Affairs, officially recognized by the European Community as a Dutch low-voltage electrical products testing organization. KEMA KEMA in a KEUR certification system under the leadership of the Dutchgovernment established an independent body - recognized by the DutchAccreditation Council. Most of the standard is largely equivalent to KEMA Netherlands Electrotechnical Commission standard (NEN standard), which in turn are based on IEC or CENELECstandards. www.kema.nl - The above information has Ningbo Qiaopu Electric Co., Ltd. General Office of the [View Details]

Page 1 Of 2 1 2 Next Last

News