Home > News
News
-
Afghanistan (Afghanistan) Plug Details-Ningbo Qiaopu Electric Co., Ltd.
Afghanistan (Afghanistan) Plug Details Range: Asia Asia Country: Afghanistan Afghanistan Description: Three very similar to the German Current: 16A Voltage: 230V Frequency: 50Hz Conversion Plug: IEC / DIN Confirm index: ★ ★ European-style plugs (two round) Description: European standard plugs (two round) manufacturing standards according to CEstandards. European standard plugs in Germany, Austria, the Netherlands, Sweden,Norway, Finland, Russia and most other European countries, since the standardwidely used throughout Europe, we call it a "European" standards. Two cylindricalplugs span of 19mm, the ground level is done on both sides of the plug ground.Central and Eastern Europe 7 / 7 European plug with embedded pins, France and Belgium, with similar outlets. In the European standard electrical socket parameters10A-16A 230ACV AC power. European standard is the world's most secure socketoutlet, mainly on account of grounding the most special people in safety. So is the world's most widely used plug standard. Note: Italy is a three-cylinder standard plug a line, marked Denmark and Switzerlandare three cylindrical plugs into a standard triangular shape, are a direct ground-levelpins. Swedish national requirements for medical use plug wiring plug is prohibited to useone injection. Russian certification GOST specifications CEE 7 / 7 plug is 16A standard. More information from the Ningbo Qiaopu Electric Co., Ltd. Sales Department to provide [View Details] -
Ningbo Qiaopu Electric Co., Ltd. employee name brand management approach
Ningbo Qiaopu Electric Co., Ltd. employee name brand management approach The first is to establish Ningbo Qiaopu Electric Co., Ltd. corporate image, improve employee pride, and display the status of the company associates, it is linked with the brand name should be full. The second brand-name all three buttons on the jacket hanging in the room, not hanging on its coat around his waist or cover, and offenders in order to not deal with the brand. Third working hours, Ningbo Qiaopu Electric Co., Ltd. employees should be linked with office space and Salesroom brand. Article probationary period new staff in the company brand should hang, but from time to engraved name, ordered after the expiration of the Department of Management; leave should be handed in, or discount compensation 100; working less than eight months left should be deducted fee $ 60. Article brands have lost or damaged, a replacement shall notify the Department of Management, each costing 60 yuan fee withheld; such as willful damage, and note the little once. Damage should be reported to the unit due to the public after the visa charge, delivery management department for replacement. Article where the following circumstances, be appropriate depending on the severity of sanctions, dismissal or brought to justice: (A) the use of brand name out of the misuse of those things. (B) the non brand-name companies to lend colleagues, while the outer damage Ningbo Qiaopu Electric Co., Ltd., honor or perpetrators. Article VII of the unit supervisor should supervise their staff linked to brand, track evaluation by the Management Department is responsible for the work, not hanging by a month the first warning, the second from a fine of 20 yuan each, the third (not included) or more, in addition to fine, a reprimand for each record, head and joint action. Salesroom personnel system by the store manager to oversee. Article VIII of the way through was Ningbo Qiaopu Electric Co., Ltd., General Manager approved the implementation, modification likewise. [View Details] -
SABS Standard, SABS Approval profile-Ningbo Qiaopu Electric Co., Ltd.
SABS Standard, SABS Approval profile SABS certification South Africa SABS certification (compulsory certification) (A) SABS Certification Overview South African National Bureau of Standards (South African Bureau of Standards, SABS) is promulgated under the 1945 "State Standards Act," established, is a subsidiary body of South African Trade and Industry. South Africa SABS is a neutral third-party certification body responsible for South Africa's system certification and product certification. In addition to standard-setting duties, SABS also on behalf of peremptory norms of national management standards, compliant products, to grant the right to use the logo, also responsible for in line with ISO9001, ISO9002 certificate issued by the enterprise, and represent the country and some major buyers responsible for pre-shipment inspection and testing, issue a certificate of competency. SABS certification is widely used in chemical, biological products, fiber products and clothing, machinery products, safety equipment, electrical products, civil engineering and construction and automotive products and other fields. In recent years, SABS certification has become the South African government the importance of weight control products imported. (B) SABS product certification range SABS certification product certification and system certification is divided into two categories, while the SABS Product Certification includes the following eight categories: chemical, biological products, fiber products and clothing, machinery products, safety equipment, electrical products, civil engineering and construction and automotive products. Which relates to building materials and products: stone products, concrete products, roofing materials, cement, lime, cement mixture, natural building stone, safety glass, steel, wood and wood products, brick, tile, paint, coatings, sealants, etc. (C) SABS logo prerequisite to obtain 1 products in line with a SABS / SANS national standards; 2 products by the corresponding standard test; 3. To meet the ISO 9000 quality system requirements or other specified requirements; 4. Only the product and quality system requirements are met before they apply for the use SABS mark; 5 routine product testing to be carried out under the guidance and submit test results and open; 6 Quality assessment at least twice a year and requires full-content assessment. (D) SABS certified general process 1 manufacturers fill out the application form completely; 2 If the factory has more than one plant, they are required to fill separate application form. Within the scope of certification requirements for each product are reflected in the application form. In addition, the plant also need to fill out the credibility of the person in charge of the application form, the person in charge to ensure that the first review of the certification fees and other costs; 3 South African Bureau of Standards, after receiving the application form will be issued a review of the quotations; 4. The offer was accepted under the premise of the South African Bureau of Standards will conduct a review of the plant; 5 If the above are reviewed by the South African Bureau of Standards will be prepared each year supervision contracts; 6 every year there will be a random review of two auditors, the annual supervisory review and testing fee will be stated in the contract; 7 random samples of two auditors will be brought back to the laboratory; 8 after the test sample, the South African Bureau of Standards will be the buyer of goods from South Africa in the extraction, if the batch of goods is less than 4 times per year, then the sample is not sent on request from the factory, the cost will be plants bear; 9. If the test result is unsatisfactory, then the cost of the sample and retest costs are borne by the factory; 10 certificate will be valid for three years, unless there are other reasons to cancel the certificate. More information from the Office of General Ningbo Qiaopu Electric Co., Ltd. [View Details] -
PSE Standard profile, PSE Approval-Ningbo Qiaopu Electric Co., Ltd.
PSE Standard profile, PSE Approval Japan PSE certification More and more countries joined the WTO, to protect their own industries and markets, many countries have enacted relevant laws and regulations, the technical specifications of the imported goods for the restrictions, technical barriers to the formation, so that products with safety, environmental protection and compatibility , while limiting the import of products - Japan is such a complex national security system. In 1995, Japan enacted a new law to ban the product, the new regulations no longer follows the principle of error-party liability, while the use of the practice in Europe and North America (the principle of fault-party liability), provided the responsible party for the safety of the product manufacturers, import Manufacturers, distributors and so on. April 1, 2001 until the Japanese electrical and Material Control Law (DENTORI) will control the products are divided into A, B two categories, of which, A class including 165 kinds of products, mainly in the power cord, fuses, switches, transformers , ballast, etc.; B class, including 333 kinds of products, mainly lighting, household appliances, office equipment. A mandatory products must obtain government certification that the T mark and the mark only by the MITI (MITI) issued. Class B compliance products or applications are required to do self-proclaimed third-party certification, for example, the S TUV Rheinland marked signs. After 1 April 2001, electrical and Material Safety Law (DENAN) replaced DENTORI law, while Japan also abolished the T flag, a certificate issued by the government no longer directly, but to authorize a third party product certification bodies for conformity assessment test. New regulations will be the product into "a particular class of electrical appliances and materials" and "non-specific electrical and material class." The "specific type of electrical appliances and materials," including a total of 112 kinds of products; "non-specific category of electrical appliances and materials", contains 340 products. To enter the Japanese market "specific electrical and material type" products must obtain third-party certification mark PSE (diamond) mark; "non-specific electrical and material class" products or applications are required to do self-proclaimed third-party certification mark PSE (round ) logo. The new law reduced the number of categories of products, more products are classified as "non-classified products", no longer constrained by DENAN, and some previously classified as "A class" product has been classified as "Specific electrical appliances and materials class." Japan's electrical products market is large, the Japanese consumer electrical product safety very seriously. From April 1, 2001, Japan "Electrical Products Control Act (DENTORI)" was renamed "Electrical Appliance and Material Safety Law (DENAE)", unity with PSE mark, and to strengthen penalties for importers. PSE (Product Safety of Electrical Appliance & Materials) certification (in Japan called "fit check") is the mandatory Japanese electrical goods market access system, in Japan, "Electrical Appliance and Material Safety Law" provides an important element . Currently, the Government of Japan Japan, "Electrical Appliance and Material Safety Law" stipulates that the electrical supplies are divided into "specific electrical supplies" and "non-specific electrical supplies," in which "specific electrical appliances," including 115 kinds of products; "non-specific electrical supplies." including 338 kinds of products. PSE includes two EMC and safety requirements. Where a "specific electrical items" directory of products into the Japanese market, must be authorized by the Japanese Ministry of Economy of third-party certification bodies, to obtain a certificate of authentication, and a diamond on the label PSE mark, as shown below: CQC only apply in China as Japan PSE certification accredited certification bodies, in February 2007, will formally submit the application materials to the Japanese Ministry of Economy. In March, Japan's METI to send NITE agency assessors PSE group of CQC-site assessment for a three-day on-site audits, review the operation of experts on the standardization of CQC and serious working attitude expressed admiration for the technical engineer give a high level of professionalism and evaluation, and that CQC is the world's leading certification body, on-site assessment is not aware of any nonconformance or observation items, ultimately with "zero defect" conclusion through a review of the CQC. April 23, 2007, the Japanese Ministry of Economy No. 129 bulletin released by the Japanese METI Minister signed an order officially authorized by China Quality Certification Center (abbreviation CQC) Japan PSE undertake compulsory product certification, thus, CQC become the UL, TUV and other international renowned certification body after the fourth by the Japanese government authorized foreign certification bodies. Currently, CQC obtained Japan PSE certification of product categories ranging from three categories: Wire and cable (including 20 kinds of products), wiring apparatus (electrical accessories, lighting, appliances, etc.) (including 38 kinds of products), electric power applications in mechanical appliances (appliances) (includes 12 products). More information from the Office of General Ningbo Qiaopu Electric Co., Ltd. [View Details] -
Norway Norway certification bodies, certification bodies Norway Norway website
Norway Norway certification bodies, certification bodies Norway Norway website Country: Norway Norway Name: NEMKO Norges Elektriske Materiellkontroll Address: Gaustadalleen 30 Postboks 73, Blindern Oslo, NorwayN-0314 Norway Tel: (47) 22 960 330 Fax: (47) 22 960 550 Fax: 45016 kema nl Type: Testing, certification bodies, the Bureau of Standards Website: http://www.nemko.no More information from the Ningbo Qiaopu Electric Co., Ltd. Certification Center [View Details] -
Nemko Certification Norway Certification, Nemko Certification Overview
Nemko Certification Norway Certification, Nemko Certification Overview Nemko Certification Nemko inception in 1933, is on the market for the sale of German Norwegian electronic devices mandatory safety testing and certification bodies .1990 national annual, Nemko started the transition, an independent international certification company operations, services, and global branch rapidly expansion. Today, Nemko offers worldwide product, machinery, spare parts and systems certification, testing and auditing services. With more than 500 professional teams, located in Norway, Britain, Germany, Italy, Finland, Sweden, the United States, Canada, South Korea , Taiwan, China and Japan and other countries and regions, many branches. Nemko, or multi-national authentication protocol important founding members, like the Nordic EMKO system, the European CCA and the international CB Scheme. Nemko commitment to protect customers' interests to provide full services, access to many countries of the certification and is clear, based on the service concept, Nemko has international certification to become the global leader in market access services. More information from the Ningbo Qiaopu Electric Co., Ltd. provides comprehensive office [View Details] -
Ningbo Qiaopu Electric Co., Ltd. Power cord statement
Ningbo Qiaopu Electric Co., Ltd. Power cord statement Ningbo Qiaopu Electric Co., Ltd. Statement: (Plant name) Ningbo Qiaopu Electric Co., Ltd. production (Fill in product name, size / type) Product Name: two-wire power cord Model / Specifications: PBB-6 6A250V [Wiring: 227IEC52 (RVV) 0.5-0.75 2 core; 227IEC53 (RVV) 0.75 2 Core] PBB-10 10A250V [Wiring: 227IEC53 (RVV) 0.75-1.0 2 core; 245IEC53 (YZ) 0.75-1.0 2 core; 245IEC57 (YZW) 0.75-1.0 2-core] Product Name: three-wire power cord Model / Specifications: PSB-10 10A250V [Wiring: 227IEC53 (RVV) 0.75-1.0 3 core; 245IEC53 (YZ) 0.75-1.0 3 core; 245IEC57 (YZW) 0.75-1.0 3 Core] PSB-16 16A250V [Wiring: 227IEC53 (RVV) 1.0-1.5 3 core; 245IEC53 (YZ) 1.0-1.5 3 core; 245IEC57 (YZW) 1.0-1.5 3 core; 245IEC66 (YCW) 1.0-1.5 3 Core] ? Meet the following requirements: a) National Standard: GB2099 b) Other relevant standards or requirements :_____________________________________________ Our fully responsible for the above statement. We, (manufacturer's name) NINGBO CHENGLONG ELECTRIC APPLIANCE CO., LTD declare under our sole responsibility that the product (detailed description of product including name type or model): PBB-6 6A250V [Wiring: 227IEC52 (RVV) 0.5-0.75 2 core; 227IEC53 (RVV) 0.75 2 core 2 core; 245IEC51 (RX) 0.5-0.75 2-core]; PBB-10 10A250V [Wiring: 227IEC52 (RVV) 0.5-1.5 2-core; 227IEC53 (RVV) 0.5-1.5 2 core 2 core; 245IEC51 (RX) 0.5-1.5 2-core]; product in (factory's name and address) Xiaoluxia Village, Simen Town, Yuyao City Ningbo City, Zhejiang Province, China 315472 to which this declaration relates is in conformity with: a) GB standards; GB2099 b) And other standards and / or regulation [View Details] -
Ningbo Qiaopu Electric Co., Ltd. Engineering Department standard documents forming operations
Ningbo Qiaopu Electric Co., Ltd. Engineering Department standard documents forming operations 1. Objective: To ensure size and other aspects of the plug exposed content with the requirements of the product quality requirements. 2. The use of things, equipment and accessories: molding machine, mold, calipers, power lines, diagonal pliers, rubber drying, anti-rust oil, plastic outlet boxes. 3. Operation step: ⑴ operation to straighten the wire placed in trunking, wire positioned flush head, molded on the cover tight, will mold onto the mold positioning arrived in tight, then switch hands and press, rubber injection, the quick take The other two wires to be produced; plastic shot finished, will die out, holding the wire ends, the wire pulled out, in order to prevent deformation of the product, (such as the product of the normal way out after the deformation, to the product shall Breaking is back), out outlet, plug the cables into the mold, the same way sequential homework. ⑵ forming before the first hit of 1 to 3 Empty mode (determined by injection of plastic material); put away and then cut a few test beer waste line, make sure the fundamental commissioning after passing into the wire, try beer, confirm all aspects of quality of fit requirements after, the head of the Department and quality control inspection to confirm the first pieces of IPQC pass before the beginning of normal production. ⑶ ⑷ before work will feed tube of rubber injection, according to loose back, off Lost machinery. Rectification stage of the information machine, the nozzle material and sweep the floor clean of rubber compounds to distinguish between the yellow color into the hopper outlet, shall not take copper or other metal material with a plastic material into the outlet box, the next day work day before the outlet of the hopper outlet is good material in bags placed in the specified address; the anti-rust oil spray on the mold, clean and adhere to machine four weeks. Early eight minutes to boot to excessive drying of plastic granules into the cutting port, turn electric switches the temperature adjusted to 150 to 180 degrees Celsius, open cooling water; until the temperature is normal, start the motor, reflect on whether the normal operation of the switch ; according to product demand, the mold injection nozzle port of a good response to the mold installed, pay attention to the upper die and lower die can have offset scene, mold and die holder assembly can parallel, so as not to crush quality injection mold and influence; debugging good molding machine Injection pressure, injection speed, injection plastic work, shot glue, packing pressure, packing time, packing speed, before and after the mold temperature, molding temperature, cooling time and other parameters. - Ningbo Qiaopu Electric Co., Ltd. Engineering Department [View Details] -
Ningbo Qiaopu staff dress regulations
Ningbo Qiaopu staff dress regulations The first company to establish and maintain a good social image Ningbo Qiaopu further standardized management, the employees shall be the requirements of this dress. Article staff during working hours, pay attention to grooming, general requirements are: decent, generous and clean. Article male staff dress code: summer with shirt and tie; the shirt, the sleeves rolled up or not the Department cufflinks; a suit, to wear the company logo. Not allowed to wear shoes other than footwear (including leather sandals). Article Ningbo Qiaopu work of female staff may not wear jeans, sportswear, short skirts, low cut shirts or other unsightly fancy dress, and always wear flesh-colored stockings. Article female staff must wear a company logo to go to work; male staff member when asked to wear a suit to wear the company logo. Company logo should wear appropriate location in the left chest. Article a vice president or more employees, Ningbo Qiaopu office must be equipped with suit, or go out to have important business to discuss when worn. Article staff to work should pay attention to the hair neatly combed. However, male staff member made the ear, and generally not allowed beards; female staff to work to promote makeup, gold, silver or other accessories should be worn properly. Article Ningbo Qiaopu Electric Co. employees in violation of the provisions, in addition to criticism, the fine of 50 yuan each; continuous violation of more than three times a month, withholding monthly bonus. Article IX of the departments, should be careful with the head line, urging his employees to comply with this requirement. Total employees in January in violation of the provisions of passengers or more than three times the total number of employees 20% of the room, and the person in charge should also be fined $ 100. [View Details] - France NF Approval information, contact information and regulations Certification - Ningbo Qiaopu Electric Co., Ltd. Country: France France Name: LCIE Laboratorie Central des industries électriques Address: 33, Avenue du Général Leclerc BP 8 Fontenay aux-Roses, F-92260 Tel: (33) 140955519 Fax: (33) 140955519 Fax: LABEL EC 250080 F Type: Testing, certification bodies Website: http://www.ccip.fr.com More information from the Ningbo Qiaopu Electric Co., Ltd. Certification Center [View Details]
Products Search
Contact Us
Contact Person:
Gavi ChenTel:
+86-0574-62166266- +86-15888180299
Fax:
+86-0574-62179799E-mail:
gavi@plug9.com
