Home > News
News
-
ASTA certification, the United Kingdom ASTA certification, the British Safety Certification
ASTA certification, the United Kingdom ASTA certification, the British Safety Certification ASTA BEAB mark: the UK Audit Bureau of household appliances and electrical equipment has been designated three qualified certification body, awarded the safety and quality certification marks. BEAB (British Electrotechnical Approvals Board) British Electrotechnical Certification Authority, established in 1960, is an independent national security accreditation authority, and controllers for household appliances to provide secure authentication and other services. After four years of operation for many years, BEAB in Europe and around the world enjoy a high reputation. ASTA (The Association of Short-circuit Testing Authorities) was founded in 1938, for switchgear and components to provide secure authentication and other products and services. ASTA (The Association of Short-circuit Testing Authorities) was founded in 1938, for switchgear and components to provide secure authentication and other products and services. January 1, 2004, BEAB ASTA merged with the ASTA BEAB Certification Services., To become the UK's largest testing organization. January 1, 2004, BEAB ASTA merged with the ASTA BEAB Certification Services., To become the UK's largest testing organization. In Europe, Sanyo, GE, Electrolux, Glen Dimplex, Sharp, Whirlpool, Panasonic and other major world-renowned enterprises in the market place, both have to apply BEAB safety mark to show the safety of their products. In China, there are already many companies to make their products more credible in the UK market, more competitive, easy to enter the international market the product successfully applied BEAB safety mark. Above by the General Office of the Ningbo Qiaopu Electric Co., Ltd. [View Details] -
China CCC certification information, CCC certification query URL, CCC certifiedsites
China CCC certification information, CCC certification query URL, CCC certifiedsites Country: China Name: China Quality Certification Center China Quality Certification Center Address: Fengtai District, Beijing, China, No. 188 South Fourth Ring Road, District 9100070 Tel -10-83886666 Fax :86 -010-83886282 Fax: Type: Testing, certification bodies Website: http://www.cqc.com.cn/ More information from the Ningbo Qiaopu Electric Co., Ltd. Certification Center [View Details] -
CCC Approvld, China CCC Standard
About CCC Approvld CCC certification is the "China Compulsory Certification", the English name "China Compulsory Certification", abbreviated as CCC. CCC certification mark of "CCC", the State Certification and Accreditation Administration Committee in accordance with "Regulations for Compulsory Product Certification" (Republic of China General Administration of Quality Supervision, Inspection and Quarantine Order No. 5) developed. CCC main content CCC certification of products related to the implementation of the national compulsory safety certification. To sum up the main contents of the following areas: (A) in accordance with WTO agreements and international rules, national law concerning human health and safety, animal and plant life and health, and environmental protection and public safety products to implement uniform, mandatory product certification system. Certification and Accreditation Administration of the unified national compulsory product certification system is responsible for the management and organization of implementation. (B) the national compulsory product certification system, the main feature, the state announced a unified directory, to determine the uniform application of national standards, technical regulations and implementation procedures, development of a unified logo identity, to establish uniform fees. Where the inclusion of mandatory product certification directory of products must be approved by the certification bodies designated by the State qualified to obtain the relevant certificate and certification mark, before entering, importing, sales and service establishments in the business use. (C) According to China's WTO commitments and reflects the principle of national treatment, first published in "the first mandatory product certification catalog" is the original product covered by the import licensing system and mandatory safety and quality certification and EMC safety certified products based on doing the right amount of increase or decrease. Products covered by the two systems had 138 species, the release of "directory" to delete the original inclusion of compulsory certification management and treatment of medical ultrasound equipment and other 16 kinds of products, increasing the safety glass used in construction and other 10 kinds of products actually included in the "directory" of mandatory product certification 132 species. Second, they issued a "compulsory product certification decoration products catalog" (including solvent-based coatings, ceramic tile, concrete, antifreeze), "mandatory product certification of Security Technology Products" (including intrusion detectors burglar alarm control, vehicle anti-theft alarm system, security safes, security safes) (D) the state compulsory product certification using a unified "CCC" mark. After the implementation of China Compulsory Certification mark, will gradually replace the original implementation of the "Great Wall" logo and "CCIB" mark. (E) national unity to determine the fees and mandatory product certification standards. New fees and development charges, according to non-profit purposes and reflect the principle of national treatment, considering the current fees and certification fees with reference to overseas and similar charges. (F) new compulsory product certification system in the May 1, 2002 into effect, the certification body officially start accepting applications. To ensure that the old and new smooth transition, the original product safety certification system and import safety and quality licensing system since August 1, 2003 onwards abolished. CCC application procedures Basic situation: · CCC certification for splitting a written application and apply online. * Application with the applicant, manufacturers, factories and product information. * Each model unit of goods should be a separate application. * The same type of goods of different manufacturers should be a separate application. Phase 1: receipt of application processing to meet the requirements of the application, certification issued to the applicant receiving notification that the applicant sent or send the documents and information. * Meanwhile, the certification body to send the fees and notification. * The applicant will be required to provide information to the certification body. * The applicant after payment, fill out the required proof of payment. [Note: The companies generally provide the following information: assembly diagrams, electrical schematics, circuit diagram; critical components and / or materials; the same application unit differences between the various models described; other required documents; CB certificates and reports (if any)]. Phase 2: Data review of the data review stage, Product Certification Engineer required for the application unit. * Unit, if the need for sample testing, product certification engineers like to send notifications sent to the applicant and the corresponding payment notice, and notify the applicant to the appropriate testing agency to send the sample to receive notification. Stage 3: Sample received samples by the applicant directly to the designated testing organization. * The applicant after payment, fill out the requested proof of payment. * Testing agencies to collect samples for inspection, fill out the sample inspection reports, samples will be issued for failure to inform the sample rectification, rectification and fill the sample inspection reports. • sample inspection, the inspection agency progress in completing the sample test in statement certification. * Certification test samples received after the progress in identifying the applicant, after related expenses paid, to issue a formal acceptance notice to the applicant to the testing organization issued a test mission statement, sample test started. Stage 4: sample testing companies in the pilot phase should be the type of work: to send test samples, parts and technical information needed to understand the trials progress, if there is failure to follow the sample test items for timely rectification rectification notice. * After the end of the test samples, testing organizations fill out the sample test results notice. * Testing organizations test reports and other information will be sent to the certification body. Phase 5: Factory Inspection * The need for application of factory inspection, testing institutions and organizations for factory inspection. * Factory inspection preparation, including: factory inspection and certification agencies have agreed on the dates and personnel; in accordance with the requirements of the factory are ready to check documents and records; inspection arrangements in the factory production line running. * Enterprises should strictly follow the requirements of the factory inspection work with the factory inspection teams. According to confirmed non-conformities and the factory inspection, to complete the rectification of non-conformity. Stage 6: conformity assessment of the various stages of product certification engineers collected the results after the initial evaluation. * The results of conformity assessment personnel for re-evaluation of the above. Stage 7: Director of the certificate to receive certification authority certificates. * Licensing of the applicant print slip, self-created or certification requirements to send a certificate. Follow-up inspection if the products are inconsistent with the type of test samples, certification bodies should be confirmed before production. • To supervise and certification agencies have agreed on the normal date. • In supervision, the production line should be normal production, and certification of products in the factory or can provide a certain amount of product available for sampling (such as: outside the warehouse, market, etc.). * Ready to supervise the required documentation and records. • Confirm findings do not meet the entry and supervision. * To complete the rectification of non-conformity. Content from Ningbo Qiaopu Electric Co., Ltd. General Office of the [View Details] -
Ningbo Qiaopu Electric Co., Ltd. plug molding operation matters
Ningbo Qiaopu Electric Co., Ltd. plug molding operation matters A Ningbo Qiaopu Electric Co., Ltd. molding operation precautions: ⑴ attention to the power cord color injection molding of plastic materials and note whether the color line drawings. At. ⑵ machine is running against the hand or other objects into the mold ⑶ attention on the quality of a process and, if negative phenomena, immediately to the supervisor to reflect. ⑷ product must be self-removed, see to pick out bad products, and rework time, there are special problems need to the higher authorities. ⑸ not both simultaneously a machine to avoid accidents. ⑹ emergency press the emergency stop switch. ⑺ prohibits hand or other body parts close to the operation of the machine parts. Second, the self-test method: A bit like the surface of the material, charred, silver, water lines, air bubble, deformation, lack of material, color, weld lines, flash, dislocation, color separation, wire crushed, exposed copper wire, wire, wire exposed too long or too short, shrink, mold using the wrong model, SR direction of the anti-, SR lifting is not enough; are ill. Third, machine maintenance: ⑴ every morning before starting the lubrication. ⑵ always wipe the surface of machine oil, clean the table to keep clean. ⑶ timely repair of the faulty machine, and a daily record of maintenance and repair of the "machine maintenance card." [View Details] -
Ningbo Qiaopu Electric Co., Ltd. employees punch regulations
Ningbo Qiaopu Electric Co., Ltd. employees punch regulations The first Ningbo Qiaopu Electric Co., Ltd. employees to work punch card, note in accordance with the Measures. Article Ningbo Qiaopu Electric Co., Ltd. back office employees to work morning and afternoon commute should punch, living in urban areas of business, and into the morning and afternoon to the company card, go to work when the beat back card. The afternoon of the third overtime of the employees who do not have to punch ordinary working hours, overtime to be finished before I punch. Article IV of the employees need to travel due to my leave early or leave the company, and not to return the same day the company, should be repulsed card before leaving the company. Article staff to work, must personally punch, if restricted to the punch, punch by punch and be who were given a punishment of demerits. Article go to work due to those who matter, do not have to punch it out of all but required to lead or designated officer in charge outside the application form, approved after the front desk clerk handed the front desk clerk to be out of time, before completing the personnel department at work for future reference. Factory workers who go out for something, go out to apply for approval by the immediate supervisor to transmit a guard, the guard will be out of time to fill in the morning to pay forward the factory management company personnel for future reference. Article forget the punch to work by holding a record card, please directly Ningbo Qiaopu Electric Co., Ltd. executive leadership proved to work time and signed the card back in place. Article VIII of the company's working hours, the company from the front desk clerk (or sent by the Ministry of Personnel) to guard the situation and adjust the punch time clocks, plant by the guard responsible. Article IX dine in Ningbo Qiaopu Electric Co., Ltd., Ltd., the back office at noon to avoid punch (can only punch to work), eat out, the punch four times a day according to the provisions of Qiaopu [View Details] - Qiaopu duty management system The first Qiaopu company holidays and outside working hours should do everything, except by a competent person responsible for their respective duties, the staff on duty should be alternates for the following purposes: (A) temporary events and the necessary measures. (B) command and supervision of security personnel on duty workers. (C) the prevention of disasters, theft and other crisis issues. (D) pay attention to hygiene, safety measures, and official secrecy. (E) all matters entrusted by the company. Article Qiaopu employees on duty, their time as follows: (A) daily from Monday to Saturday until the next morning at work when the working hours only. (B) the holidays: the day shift until eight o'clock to 5 pm (office hours may change with the change). Night half past five p.m. until eight o'clock the next day only. Article staff duty schedule arranged by the department, announced late last month and notified Qiaopu duty officer on duty on time. And should set duty card, indicate the names of staff on duty at the obvious place hanging. Article IV staff on duty should be in the designated place within the time continuous performance task, no stopover, or free to go out and be a company or factory in the place designated by the board. Article staff on duty in case of incidents can be dealt with first, only after the report. In case of its terms can not handle, and should be immediately notified and asked for competent leadership. Article staff on duty were receiving the message should be handled in accordance with the following: (A) are within the competence of immediate treatment. (B) non-authority clinics, depending on their nature should immediately contact the relevant person in charge of processing. (C) Confidential letters or limit should be kept intact immediately, when presented to the leadership at work. Article Qiaopu duty staff on duty should fill out the matters dealt with when the report form, forwarded to the competent leadership in the shift evacuation inspection report form the other set. Article staff on duty in case of emergencies handled properly, the company reduce losses, the company depending on their circumstances to give awards. Article IX staff on duty on duty time, absence from duty should be given demerits punishment, serious losses were due to be severely punished. Article staff on duty due to illness and other reasons can not be on duty, should first leave or ask other agents and employees was accurate, traveling likewise, agents should bear all the responsibility. Article XI Qiaopu employees on duty on duty to receive benefits, the standard alternative. [View Details]
-
Ningbo five power cord manufacturers
Ningbo five power cord manufacturers base of the power cord: Yuyao City, Ningbo Top five road under the village committee the power cord manufacturers First: Ningbo Qiaopu Electric Co., Ltd. (http://www.qiao-pu.com) Second: Ningbo Yunhuan Electronics Group Co., Ltd. (http://www.yunhuan.com) Third: Appliance Co., Ltd. Ningbo noise (http://www.nbxuanhua.com/) Fourth: Ningbo Cheng Long Electric Co., Ltd. (http://www.nbchenglong.com) Fifth: Ningbo Ouyi Sheng Electric Co., Ltd. (http://www.oushengnb.com) Ningbo Qiaopu Electric Co., Ltd. brand awareness in the industry has considerable influence, and its brand "Qiaopu" is an honorary overseas, good quality, low prices, fast production is Qiaopu unique titles, products and more Product wide variety and other advantages, Ningbo Qiaopu Electric Co., Ltd. in the industry firmly stand their own pace, in 2011 the most powerful manufacturers in the power cord, Ningbo Qiaopu Electric Co., Ltd. is also also topped the list! [View Details] -
Ningbo Qiaopu Electric Co., Ltd. production LSZH power cable feed
Ningbo Qiaopu Electric Co., Ltd. production LSZH power cable feed Ningbo Qiaopu Electric Co., Ltd. developed halogen-free flame retardant polyolefin material the use of new high-power line expansion of nitrogen and phosphorus flame retardant and halogen-free advanced formula system of environmental protection made by mixing extrusion granulation, with low smoke , non-toxic, high flame-retardant, easy out, excellent mechanics and other functional advantages, the product has been through a number of state departments of technical prestige institutions function tests, fully fit domestic smoke zero halogen flame retardant cable features flame-retardant materials specification, developed by the EU ROHS Directive fit the requirements can be widely used in power cables, control cables, marine power lines, communication cables and cable insulation and sheathing materials, low smoke zero halogen flame retardant material is a traditional choice for replacement product. The product successfully handled a halogen-free flame retardant cable estimate the fire-retardant features, functions and physical function of processing constraints conflict with each other, with six features: First, efficient fire-retardant features v charcoal burning speed film is good, lit the fire to reach after moving rapidly away from the self-extinguishing. Mg-Al system with flame-retardant cable materials compared to 30 company oxygen index of the product is equivalent to 35 Mg-Al system, a product of the oxygen index of flame-retardant features. v data by the flame-retardant low smoke zero halogen cables made of wire and cable types are available through the VW-1 single vertical burning test and the rest into the bundle at all levels of combustion experiments. Single vertical burning test to reach the moving rapidly away from the fire self-extinguishing; combustion of carbon into the beam height is small, normal 0.7 meters, slightly beyond the flame height. v smoke density when burned, in the same product in a first position. Second, the high standard of environmental features The product of all non-toxic non-halogen flame-retardant materials, from manufacturing to customer use, to recycling the application of the whole process all pay and green ideas, to reach low smoke, low toxicity, low corrosion, non-halogen, lead-free, sulfur-free / antimony, and the situation of people without any pollution, fit the requirements of EU environmental protection. Third, the superior physical and mechanical features The product features excellent physical and mechanical, tensile strength more than 14MPa, elongation at break of up to 450%, and features excellent resistance to cracking the case, special is soft in the production of large cross-section or high requirements has raised the advantages of cable , suitable for low temperature production of cables and main areas of production. As we all know, LSZH cable jacket material in the long time (3-6 years) use of easily cracking scene showing the formation of LSZH cable materials resistant to cracking functionality of the most important cause of poor LSZH cable is estimated to add in the amount of inorganic flame retardants, anti-cracking features good or bad the situation can be characterized by the elongation at break. Our LSZH cable materials used are high-nitrogen and phosphorus intumescent flame retardant, add a small amount, only 50% of your base material, tensile strength can reach more than 14MPa, elongation at break of up to 450% or more; and Mg-Al system LSZH flame retardant cable compound Mg added capacity, to account for more than 150% of the base material, its tensile strength elongation at break is much smaller, resistance to cracking the case is also poor. Fourth, the superior processing capabilities The products in various types of equipment that has versatility. No special screw extrusion and high-power motor, just the normal cooling and temperature control system can be completed on the popular high-speed PVC extrusion extruder; extrusion speed, the melt tension than good, with die easily; processing temperature limited width (130 ~ 180 ℃), good thermal stability, can be repeated repeatedly heated extrusion. Fifth, energy saving, so that customers everywhere profits No change from the screw and motor, the production speed of delivery, equipment wear and tear is small, the nose of recyclable materials have demonstrated the application of criteria for saving energy, so that every aspect of energy production strung, so the price is limited, energy-free limit, so that the product even more harmony with the situation Six, convex cost The product density of 1.02 ~ 1.07g/cm3 density between the popular LSZH information about 1.48g/cm3 your product density, comprehensive cost-raised. [View Details] -
Ningbo Qiaopu Electric Co., Ltd. cable wire, power cable Specification
Ningbo Qiaopu Electric Co., Ltd. cable wire, power cable Specification Ningbo Qiaopu Electric Co., Ltd. wire, power line model rules: AC power cord from one or a few soft wire form, wrapped in a light soft sheath; cable is an insulated bag or a few wire form, and then wrapped in metal or outside the system of tough rubber outer layer. More than ordinary cable with 2 layers of insulation, mostly multi-core structure around the cable tray, the length of the ordinary than 100 meters. AC power cord is a single ordinary insulated, single core, 100m roll, the wireless set. Cable and AC power cord common by wire, insulation and maintenance of skin wrapping the three constituent local composition. BV - Copper conductor PVC insulated cable (wire) BVR - Copper conductor PVC insulated flexible cable (wire) BVV - Copper conductor PVC insulated PVC sheathed round cable (wire) BVVB - Copper conductor PVC insulated PVC sheathed flat cable (wire) BV-105 - 105 degree heat resistant PVC insulated copper wire BV-ZR flame retardant PVC insulated copper wire BVR-ZR flame retardant PVC insulated copper wire BVR-ZR-105 Copper heat 105 ℃ flame retardant vinyl insulated PVC sheathed round flexible cables BV-ZR-105 105 ℃ heat-resistant flame-retardant copper core PVC insulated wire BVV-ZR-105 105 ℃ heat-resistant flame-retardant copper core PVC sheathed round cable BVV-ZR flame-retardant copper core PVC insulated PVC sheathed round cable BVVB-ZR flame-retardant copper core PVC insulated PVC sheathed flat cable AVR-ZR-105 105 ℃ heat-resistant flame-retardant copper core PVC insulation flexible cord AV-ZR flame-retardant copper core PVC insulation cable AV-ZR flame-retardant copper core PVC insulation flexible cord AV-ZR-105 105 ℃ heat-resistant flame-retardant copper core PVC insulation cable RVB - Copper conductor PVC insulated flat flexible wire type interface RVV - core PVC insulated PVC sheathed flat type of interface cable (wire) RV-105 - 105 degree heat resistant PVC insulated copper flexible wire interface RVS - stranded copper core PVC insulated flexible cable link SYWV (Y), SYKV cable TV, broadband cable network dedicated structure: (coaxial) single oxygen-free round copper + physical polyethylene foam (insulation) + (tin wire + Al) + PVC (PE ) SYV: Solid polyethylene insulated RF coaxial cable SYWV (Y): shave foam polyethylene insulation materials cable cable television systems, video (RF) coaxial cable (SYV, SYWV, SYFV) combined Projects in CCTV and CATV RVVP shielded wire: copper core PVC insulation shielded PVC sheath flexible cable voltage 300V/300V 2-24 core purpose: instruments, meters, intercom, monitoring and control installation RG: physical foam PE insulation coaxial cable for fiber-optic access network, hybrid network (HFC) transmission of data in analog signals KVVP: PVC sheathed braided shielded cable applications: electrical, instrumentation, power distribution unit of signal transmission, control, measurement RVV sheathed cable (227IEC52/53) PVC insulated flexible cable uses: household appliances, small electric tools, instrument and power lighting AVVR PVC sheathed flexible cables for installation SBVV HYA data communication cable (indoor and outdoor) for telephone communication and radio equipment, telephone wiring network connection and junction box for wiring RV, RVP PVC insulated cables RVS, RVB for household appliances, small electric tools, instruments, meters and power connection cable lighting SDFAVP, SDFAVVP, SYFPY coaxial cable, Elevator JVPV, JVPVP, JVVP core PVC insulated and sheathed copper wire braided computer control cable BV, BVR PVC insulated cables use: used in electrical instrumentation and power wiring with fixed lighting RIB speaker cable (fever line) KVV PVC insulated control cable applications: electrical, instrumentation, power distribution unit signal transmission, control, measurement SYV coaxial cable wireless communications, broadcasting, surveillance systems engineering and related electronic equipment to transmit radio frequency signals (including the integrated use of coaxial cable) SFTP twisted pair telephone, data and information network UL2464 Computer Cable VGA Monitor Cables - Ningbo Qiaopu Electric Co., Ltd. Engineering Division [View Details] -
Ningbo Qiaopu Electric Co., Ltd. The factory management access
Ningbo Qiaopu Electric Co., Ltd. The factory management access 1. Ningbo Qiaopu Electric Co., Ltd. employees should wear uniforms to work, features a badge on the left chest at, before it may punch out of factory. 2 Assistant Project (management) above the division staff and the public to be frequented by plant personnel were approved by the Factory Director may at any time access to plant (badge marked symbols). 3 because of the public to be on duty out of the temporary plant should be with the "practitioners of entry permits" (Table 3.6.1) in triplicate attested by the competent head of the first joint deposit of its service sector, the second and third Contact the factory by factory guards after a third joint endorsement temporary guard room, the second one by the staff to carry out Gongchu points (the) plant who Ningbo Qiaopu Electric Co., Ltd. Gongchu staff present their second joint support by the points ( the) plant into the plant after signing guard into the plant, the second temporary joint points (the) plant guard room. Company completed the factory by the points (the) plant guards kept out of the original entry permit detection of the second joint cross Gongchu endorsement after the factory workers who return; Company completed a second joint Depot Gongchu personnel guarding the detection of the original deposit by the first triple, respectively, indicate the time of the factory, the third joint the next day before 10 am forwarding services by the department head guard verification, the second one temporary guard rooms before 10 am the next day transferred to departments to check attendance records of attendance, if there are any abnormal situation should be to contact their service department in charge of processing. 4 non-duty personnel to be temporary because of the public into the factory, should fill out the guard room, "employing the entry card" in triplicate signed by the guard checked into the plant after the first joint deposit guard room, the second and third Union members carried by the factory to; things completed attested by the competent chief, with the certificate endorsed by the guard at the factory the first time together, the first joint guard room's copy, the second one before 10 am the next day transfer time and attendance departments, such as In case of unusual circumstances should contact their service department heads that deal, the third joint before 10 am the following day by the guard room service delivery charge of verification. 5 work hours of employees leave the factory, should be required to punch out the formalities for leave Ningbo Qiaopu Electric Co., Ltd. [View Details]
Products Search
Contact Us
Contact Person:
Gavi ChenTel:
+86-0574-62166266- +86-15888180299
Fax:
+86-0574-62179799E-mail:
gavi@plug9.com
