Home > News
News
-
Ningbo Qiaopu industry associations to join the power cord
Ningbo Qiaopu industry associations to join the power cord Today, Union Ningbo Qiaopu Electric Co., Ltd. Simen Union Committee to participate in the meeting - on accession to the power line industry association's decision. Ningbo Qiaopu Electric Co., Ltd. has more than 1,300 employees as the power line industry, leading enterprises in Ningbo, the first to join the Union, Simen town government organizations, industry associations the power cord, this means that the power cord in Ningbo our industry to achieve mature stage of identification, but also represent the majority of employees for the benefit of electrical Qiaopu great significance. This has also allowed many to brothers and sisters working in Ningbo, Ningbo enterprises the same treatment to see, the human struggle with the system, the more I believe the future will be built in Ningbo better future Qiaopu appliances will also be getting larger and larger! [View Details] -
Qiaopu electrical identification card usage
Qiaopu electrical identification card usage (A) to enhance site access control, to prevent loitering, etc. without the Ru Qiaopu electrical plant, to facilitate the identification, formulation of the rules. (B) Qiaopu appliances to work with identification cards are classified as follows: 1 Red: Management Department staff to wear. 2 yellow: Finance Department staff to wear. 3 light green: Sales Department employees to wear. 4 light blue: Planning Department staff to wear. 5 gray green: construction department staff to wear. 6 Green: Inspection room staff wear. (C) the items identified on the card, electrical site Qiaopu be worn all the staff, manager of the company for employees below the rank of wear. (D) Qiaopu new staff settle into electrical plant procedures, identification cards issued by the personnel unit. (E) Qiaopu electrical contracting officers requisitioned temporary identification cards as follows: 1 where the short-term contract work within 10 days of written notice by the unit in charge of guard and put deposit contracting the guard in exchange for personal identification badge to wear round, and identification cards handed in at the factory in exchange for ID cards. (2) Where more than 10 days longer-term contracting, made by the unit to send a list of photo identification cards of personnel units have requisitioned from the factory and handed in by the unit, short of loss if handled according to Article XII. (F) identification card shall be worn above the left chest on jacket, no coat to cover other identification cards, and offenders do not wear identification cards according to treatment, remove the identification card upon separation. (G) identification card functions in the display department of the company associates the identity of all employees at all levels should wear it, if there is not the wearer and, if proved, the first warning, the second current withholding deserved third of the profit bonus of the amount, two-thirds of the amount of withholding the third, fourth after all the money that is withheld, the withholding of part of the notification by the personnel unit of the Ministry of Finance charged when issuing profit bonuses. (H) Qiaopu electrical identification cards if lost, by written notice to the unit in charge of personnel replacement units, and withholding fee $ 15. Damage due to the public, may report to senior director of visa unit, the personnel unit recertification. (I) Where one of the following circumstances, be appropriate depending on the severity of punishment or dismissal and brought to justice. 1 identification card lending and non-colleagues out of the factory by the company. 2. I am out for improper use of identification cards of those violations. 3 identification cards to lend to others outside the perpetrators. (J) Temporary Qiaopu electrical contracting officer not to wear, or factory guards should notify the unit in charge of the management group is prohibited to factory work, or if an accident occurs, the unit takes charge by the full responsibility. (K) Qiaopu Electric employees during working hours, should wear identification cards according to requirements, methods likewise. (Xii) permit any person to identify the recipients when they leave, the personnel unit should surrender the certificate, or discount compensation of $ 100. (M) Upon approval of the rules were implemented after revision likewise. [View Details] -
Ningbo Qiaopu Electric Co., Ltd. power line insulation resistance test, comparison galvanometer
Ningbo Qiaopu Electric Co., Ltd. power line insulation resistance test, comparison galvanometer Ningbo Qiaopu Electric Co., Ltd. power line test equipment Measurement system wiring diagram, the main components should meet the following requirements: Galvanometer current constant is not greater than 10-9Ω/mm. Shunt shunt factor should be able to 1 / 10000 to 1 / 1 to range, and adjust the series less than five, should be equal to or slightly greater than the critical resistance galvanometer external critical resistance, but not more than 20% . Standard resistance is not less than 105Ω, the relative error of less than ± 5%. DC output voltage, output voltage does not exceed ± 1%. Shielding galvanometer, shunt, standard resistor, measuring cable and line components and shielding should be connected to the base, was shielded components and shielding than standard insulation resistance between the resistance of at least 200 times larger. Galvanometer with a battery for the lighting power, the power supply must be placed within the shielding system. If AC power supply, it must be step-down transformer and low voltage side of the shield connected at one end. Qiaopu power line power line sample preparation Except as otherwise provided in the product standards, the effective length of the specimen is not less than 10m, outside of the insulation at both ends of the specimen should be carefully stripped cover, pay attention to not damage the insulation surface. Sample should be placed in the test environment long enough time to allow the sample temperature and test temperature balance and stability. Immersed in water test, the sample both ends above the surface of the length should be not less than 250mm, the length of exposed insulation should be not less than 150mm. In the air tests, the sample exposed ends of the insulation jacket length should be not less than 100mm. Exposed insulation surface should be kept dry and clean. Ningbo Qiaopu Electric Co., Ltd. of test procedure A general rule is as follows: Metal sheath power cable, shielded power cable or power cable armored sample, single-core, should be measured on the metal conductor sets or armor, or shield between the insulation resistance; multi-core, should be separately on each The remaining lines of the core conductor and metal sleeve or shield or armor layer connection be measured. Non-metallic sheathed power cable, unshielded power cord or power cable without armor sample shall be immersed in water, single-core conductor by measuring the insulation resistance between the water; multi-core conductor should be separately on each of the remaining lines core measurements and water connections. Samples can also be tightly wrapped around the metal rod on trial, single-core conductors of the power cord measuring the insulation resistance between the test bar; multi-core power cord cable measuring the remaining core of each conductor of the connecting rod with the insulation resistance test. Diameter test bar according to product standards. Measurement error: Measured resistance value of 1 * 1010Ω or less, not more than ± 10% Measured resistance value of 1 * 1010Ω more, no more than ± 20% 2 access to the sample measurement system. The effective sample length measurement error should not exceed ± 5%. 3 measure resistance RN. Closed switch S2, and then close S1, appropriate adjustments shunt diversion coefficient P, the galvanometer G has a significant deflection readings. Record deflection readings αN and the split ratio nN. Insulation resistance measurement sample 4 RX: Disconnect switch S2, step by step adjustment factor shunt diversion of P, so that the galvanometer G has a significant deflection readings. Record deflection readings αX, split ratio nX and the charging time t. Measuring the charging time should be sufficient to achieve stable measurement. In addition to the product standards as otherwise provided, the charging time of 1min. 5 record time of the test temperature. 4 repeat tests, the applied voltage, before closing switch S2, the sample short-circuit discharge, the discharge time should be no less than four times the sample charging time. 5 Ningbo Qiaopu Electric Co., Ltd. The results and calculations 1 specimen insulation resistance calculated as follows: RX = RN · (αNnX / αXnN) (1) Where: RX - sample insulation resistance, MΩ; RN - standard resistance, MΩ; αN - measure resistance galvanometer deflection readings; nN - measure the shunt shunt resistance coefficient; αX - measuring specimen deflection galvanometer readings; nX - when measuring the sample coefficient of shunt diversion. 1.5.2 Insulation resistance per kilometer length of the formula: RL = RXL (2) Where: RL - per kilometer length of the insulation resistance, MΩ · km; L - effective measurement of the length of the sample, km. 1.5.3 20 ℃ when the insulation resistance per kilometer length of the formula: R20 = K RL (3) Where: R20 - 20 ℃ per kilometer length of the insulation resistance, MΩ · km; K - insulation resistance temperature correction factor, provided by the special file. 1.5.4 The results obtained by the number of significant figures should be consistent with product standard requirements. [View Details] -
Ningbo Qiaopu Electric Co., Ltd. Profile
Ningbo Qiaopu Electric Co., Ltd. Profile Ningbo Qiaopu Electric Co., Ltd. is a professional manufacturer of all kinds of power cord, rubber cable, extension cord, plugs, sockets, drag-line plate, coil, connectors and other products. Products for the modern international standard AC and DC connector series, the service appliances, power tools, computers and other electronic products computer. The company introduced advanced production equipment and test equipment, and strive to provide first-class products. After a long effort, Ningbo Qiaopu Electric Co., Ltd. has achieved ISO9001: 2000 and ISO14001 based on the country through the CCC; American UL, CUL; German VDE, GS; UK BSI; the Netherlands KEMA; Australia The SAA; Korea KETL; Brazil INMETRO more than 20 countries safety certification. Products all over the world, good quality, good service, reasonable prices, domestic and foreign customers alike. Ningbo Qiaopu Electric Co., Ltd. deeply felt only the quality and credibility in order to make our brand more firmly. Our company always adhere to the "equality, cooperation, friendship, win-win" principle, willing to work with domestic and overseas talents to work together. [View Details] -
Qiaopu four corporate image management strategy
Qiaopu four corporate image management strategy Qiaopu to win the loyalty of customers, partners, trust and government support, in addition to leading technology and reliable quality of products, to establish and consolidate the good corporate image is important, the image of an effective management strategy is Qiaopu must be means. First, to establish Qiaopu management in the power line industry thought leadership Unlike individuals in the glorifying style Qiaopu corporate image building, business leaders should Qiaopu personal information and corporate strategic objectives, public relations goals together to achieve good publicity. This can be through the establishment, development managers can improve the reputation of the platform to achieve. For example, in a number of influential domestic and international high-level meeting for the business managers for a number of speaking engagements; will contain a representative of senior management's strategic thinking and management strategies available to the media published articles; regularly or irregularly organize expert discussions , seminars and media seminars, to establish a good reputation information. Second, Qiaopu grasp the need to participate in activities In the first pre-participation of the existing social welfare policies of Qiaopu very understanding, if multinational companies, it is necessary for the headquarters of the social welfare policies have to understand, clear and host countries, project activities business objectives and procedures the same, after all the internal procedures to be implemented after approval and input; return on investment but also give full consideration to ensure that any alternative long-term development and corporate reputation and consistent with the goals to ensure the participation of the purpose and nature of the match, keeping corporate branches image of the same. Also, understand the competition's initiatives in social activities and is involved in the project. There are some types of activities worthy of further consideration. Sponsorship and charitable activities both for multinational and domestic companies are to follow, "taken from the community, giving back to society" the principle of performance. Sponsorship usually involve sports, arts, culture and many other related activities. Third, to enhance crisis management capabilities Qiaopu Qiaopu first potential crisis of its own, and events have a full understanding and awareness; and can as the situation changes and the development of some potential new problems, new phenomena to be analyzed, studied and resolved; in the daily management of the crisis in more preparation, such as summary and foreign experience in crisis management and crisis information to prepare detailed research and analysis, looking for the best practice model for continuous crisis management training and simulation exercises; the enterprise may face all the potential events and crises are lists to identify appropriate countermeasures to resolve the crisis, including critical information, training deal with the media spokesperson, press release preparation, when to do calmly deal with the crisis all the questions from all aspects of preparation; to do in a crisis a fast response, clarify their message and to be channels of information transmission; timely and adequate communication with the media, keep track of public opinion through the media, ideas and views of the outside of the company, to grasp a new public opinion and point of view. Fourth, the coordination of many aspects of the relationship Qiaopu Qiaopu coordination of internal relations is a very important task is to assess the existing internal public relations activities and programs, establish new channels of communication with company employees. Can be run as "employee communications", via the Internet or intranet for internal communication and the establishment of information feedback mechanism. Coordination of external relations work, to establish a good government relations and seek the support of influential people is very important. To develop a proactive government relations program, and influential people to establish close links to help companies get through effective communication with benign supervision, understanding and support to enhance corporate credibility. In short, understanding the target audience faced a matter of concern to master corporate image management strategy, the tree a good corporate image in order to achieve Qiaopu company's value-added, to achieve the ultimate goal of maximizing shareholder value [View Details] -
Qiaopu technological security contract
Qiaopu technological security contract Party: Ningbo Qiaopu Electric Co., Ltd. B: Qiaopu employees Both parties under the "Anti-Unfair Competition Law" and the national and local relevant regulations on the protection of technological secrets reached the following agreement: (A) the content and scope of confidentiality Qiaopu 1 B of the contract period prior to holding scientific research and technological secrets have been Party application and production. 2 B in the contract period of the invention of scientific research. 3. Party has been scientific research and technological secrets. 4. Party all the technical information. (B) the rights and obligations of both parties Qiaopu 1 Party A Party B to provide a good application of scientific research and production conditions and create economic benefits based on reward. (2) the requirements of Party A Party B must be engaged in the research and development projects, and research and development of the Party to save all the data delivery. 3. Party B must strictly abide by the secrecy, to prevent the disclosure enterprise technical secrets. 4 without the written consent of Party A, Party B shall not use a new technology research and development secrets. 5 B after both sides terminate the employment contract shall not be in production within three years and there is competition between similar products of other companies within the office. (C) the term of the agreement 1. Employment contract period. (2) terminate the employment contract of three years. (D) Qiaopu confidential amount of the fees and payment Party B technical achievements of a reward, bonus fee includes confidentiality, privacy and one of its bonus amount of the fees, depending on the role and its technological achievements to create economic benefits may be. (E) breach of contract 1 B violation of this agreement, Party A the right to unconditionally terminate the employment contract, and cancel the recovery of the treatment. 2 B part of the violation of this agreement, cause some economic losses, depending on the seriousness Party B imposed a fine of 3 to 10 million. 3 B violation of this agreement, resulting in significant economic losses Party should be compensation for all losses suffered by the Party. 4 above breach of contract execution, more than laws and regulations, give the competence of both parties, arbitration or arbitration application to the Court of Appeal. Party A (seal) Ningbo Qiaopu Electric Co., Ltd. Party B (seal) Qiaopu all employees Legal representative signature signature 2011/7/18 [View Details] -
Ningbo Qiaopu Electric Co., Ltd. Tel management system
Ningbo Qiaopu Electric Co., Ltd. Tel management system Ningbo Qiaopu Electric Co., Ltd. The first Ningbo Qiaopu the plant room is the confidential communications powerhouse, unrelated persons allowed to enter the room without permission. The second operator on duty, they should stick to their posts, so that: 1 then, turn quickly and accurately; 2-in using words concise, clear, answer politely and patiently; 3 seriously make the original records and data statistics; 4. Careful operation, care facilities, every day before work, after work to do the engine room, machine cleaning; 5. Make shift relief and long-distance telephone records; 6 strict code of confidentiality, do not tap phones, do not leak secrets. Where public and third sector need to hang long-distance telephone and personal, must first carry out registration procedures × ×, fill out registration cards, after approval, the total room can handle. Without approval, the operator will be allowed to hang long-distance calls. Fourth principle, private and other units who received long-distance calls, special circumstances, be approved to carry out registration procedures × ×, and the finance department for payment of the deposit procedures, the switchboard room to mount it after the call with the total room receipt to the finance department to settle charges. Article Ningbo Qiaopu Electric Co., the engine room are not allowed to smoke, noise and chat, are not allowed to be inflammable and explosive materials into the room, allowed to dry other things related to work. Article operator should always check the machine good condition, found that failure can not be excluded should be promptly reported telephone service members and leadership. Article operator should be regular users access to the continuous improvement of service quality. Article Ningbo Qiaopu Electric Co., Ltd. Tel regular maintenance staff, subject to the provisions of maintenance of equipment room, and make a record, to ensure smooth flow line. Article IX × × switchboard communication should always be the case for transfer to the post office and various types of long distance calls to be checked. [View Details] - Qiaopu travel regulations In order to strengthen the management of travel costs, QiaoPu enactment of this provision. Article Qiaopu employees travel by the following procedures: (A) should be completed before a business trip "travel application form." Period by the person in charge of travel, as necessary, to send in advance to be approved, and implemented in accordance with the nuclear program. (B) the person traveling with the approved "travel ticket" to the Finance Department of the advance a considerable amount of travel costs, return to fill out within a week after "a travel report card", and to settle the advance shall not be reimbursed within a week who finance should be thoroughly month deducted from wages, and other nuclear re-payment when the reimbursement. Article Qiaopu travel review the decision rights are as follows: (A) Domestic travel: approved by the department manager within six, 4 or more approved by the competent vice president, department manager, and above all by the general manager for approval. (B) traveling abroad, be approved by the General Manager. Article Qiaopu not reported on business support overtime pay, holiday travel, as appropriate, but the new design. Article Qiaopu business trip due to illness or an accident in addition to disaster, or because of the practical needs of telephone contact, referrals to approve the delay, but not on private business, or an excuse to extend the travel time, or not to reimburse travel costs in addition to outside, and according to circumstances severity punished. Article on business travel costs are divided into transportation, lodging, meals, communication costs, communication charges, the standard alternative. Article Qiaopu reimbursement of travel expenses: (A) transportation, lodging at the standard reimbursement, excessive pay, lack of standards have not been replaced. (B) to receive the standard meals. (C) communications in order to post documents for reimbursement. (D) approved by the leading entertainment expenses, credential reimbursement. [View Details]
-
Ningbo Qiaopu Electric Co. employees transferred control methods
Ningbo Qiaopu Electric Co. employees transferred control methods First, to guarantee Qiaopu employees reasonable activities, but also guarantee the benefits do not damage the company out, especially the development of the rules. Second, the employee transferred approval authority according to our system right into the personnel responsible for execution. Third, employees do not conform to the current Qiaopu task booth, you can request a trade or exchange booth, after the exchange such as not conform to the company the right to terminate the employment contract, include a formal employment contract, and homes with short-term employment. Fourth, the company transferred employees required, the following procedures should be addressed. (A) fill out the form from the transfer and processing procedures. Five staff transferred, the payment of wages by employees and the employment contract signed by the company handled. Six employees without consent, without separate task booth of 1 month, Qiaopu company newspaper and stop pay request removal labor, insurance, workers returned to their sense of human relations personnel component. (B) the relevant parts of the inventory requirements, refunds, transfer of corporate wealth, material; (C) the division of responsibilities and rights by the personnel table, adjust the approved report, please tune into the Ministry of Personnel (or the Labour Department) fill out form countersigned by staff transferred from the transfer procedures; (D) to make this part of the report, please tune [View Details] -
Ningbo Qiaopu Electric Co., Ltd. China travel management approach
Ningbo Qiaopu Electric Co., Ltd. China travel management approach The first Ningbo Qiaopu Electric Co., Ltd. and owned the factory and business office staff because of the public who deployed to the domestic travel on official business, issued pursuant to these Regulations out of travel. Article Ningbo Qiaopu Electric Co. employees train, ship, aircraft, according to the criteria given in Table 16.4.1 transportation: (A) by train and bus, in principle, be issued by the Railway Administration, Highway or the car's purchase that one, if for some reason were unable to obtain proof of a single ticket from the travel vouchers were issued. (B) take the ship should take a steamship company or travel agency purchase order or ticket stub to prove. (C) the urgent public need to fly should be reported to the root level and reported with tickets for travel support. (D) take the company's vehicles were not reported to support travel expenses. Article Ningbo Qiaopu Electric Co. employees travel meals, lodging, fees according to the following standards issued by the A charge of Class: 1.20 per day General Class B: 1,00 per day Article on public spending during a business trip the following fees are allowed claims in real and in accordance with the following provisions: (A) should in principle be made by taxi car company issued uniform invoice, can not get those vouchers issued by the mission personnel as proof. (B) the telegraph and telephone charges should be taken with the bureau's receipt as proof. (C) Postage shall be taken as evidence of a post office as proof. (D) the cost of public banquet, to be taken with a full uniform paste printing invoices or official receipts as proof. (E) the public to carry luggage shipping, shipping should be taken with official receipt as proof. Article Ningbo Qiaopu Electric Co. employee travel, travel charge of the unit should be filled to send a single notice in duplicate, after the approval of your delivery, registered with the Secretariat to send a travel date, a business trip, against advances from the newspaper or support travel expenses (prescribed form fill out one). Article staff travel within three days after poor sales should fill out "a single branch travel report", please send verification of the delivery unit in charge requested the Secretariat to review, approval, general manager, the cashier will gain support by virtue of the report. Article Ningbo Qiaopu Electric Co. employees travel before the trip was to send notice with the approved travel advances, travel expenses for travel expenditure report is completed when the claw back. Article VIII of the city and short (one day) mission personnel, in addition to supporting the real newspaper fare, the other branch may report errors meals. (A) at 1:00 pm and after poor sales reports were accurate lunch. (B) eight p.m. after poor sales reports were accurate plus dinner. (C) shall not be reported to support overtime. Article IX ordered to dispatch personnel, can, according to the provisions relating to the above reports support transportation, meals (one day) and luggage shipping. Article dispatch personnel if a meal in the company, the branch may not report errors meals. Article XI dispatch personnel if more than one day but not as a business trip, and can be subsidized by the company's discretion. [View Details]
Products Search
Contact Us
Contact Person:
Gavi ChenTel:
+86-0574-62166266- +86-15888180299
Fax:
+86-0574-62179799E-mail:
gavi@plug9.com